Derbyshire · England
Bath Re-enamelling in Gamesley
Full bath re-enamelling and resurfacing at your home in Gamesley, with a one-year guarantee on every repair.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that is failing
Gamesley and the surrounding area
Gamesley is about 1 mile west of Glossop, in Derbyshire. From the centre of Gamesley to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 532 towns and villages in Derbyshire. You can also see our page for Manchester, about 10 miles away.
Every address in SK13 is within our area, from the main roads to the quietest streets. From Buxton Mews, Grindleford Gardens and Grindleford Walk or anywhere nearby, a technician can come to you. We also travel to Higher Gamesley (1 mile south), Dinting Vale (1 mile east), Higher Dinting (1 mile east), Bankwood Gate (1 mile south-west) and Simmondley (1 mile south-east). We also work in nearby towns such as Buxton (14 miles south), New Mills (6 miles south), Chapel-en-le-Frith (9 miles south), Whaley Bridge (8 miles south), Ollersett (5 miles south) and Tideswell (15 miles south-east).
Local landmarks in Gamesley
Locally, our jobs take us to homes close to St Philip Howard Catholic Voluntary Academy, Bishop Geoffrey Allen Church and St Philip Howard Catholic Voluntary Academy. Nearby too are Manor Park (1.8 miles east) and Gamesley Primary School (within half a mile west). Gamesley’s nearest station is Dinting station, about 0.6 miles east. Further afield, we also cover the area around Longdendale (1.4 miles north-west) and Shire Hill Hospital (1.9 miles east). The countryside around Gamesley includes Wild Bank and Swallows Wood.
Bath re-enamelling in Gamesley without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s worn patches where water runs and sits and a peeling or bubbling previous coating, we can help, whatever the material.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Gamesley (SK13)
- Area hub
- Derbyshire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Gamesley
What else we do in Gamesley
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Do you need bath re-enamelling in Gamesley?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People typically call us when they notice something like this:
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Before booking anyone
- How the room is protected while they work
- Who turns up on the day
- What happens if they find more damage
- Whether there are any call-out or travel charges
Landlords, agents and businesses in Gamesley
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Gamesley, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Ensure the area is dry
Get a quote
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
What a repair cannot fix
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Questions from Gamesley
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Do you cover the entire of Derbyshire?
We work UK-wide, so Gamesley is covered. Prices do not change with location.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What happens once I’ve sent pictures?
We come back with a fixed quote, usually with dates to choose from. There is no obligation to book.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Store bottles off the bath
- Do not use the bath until it has fully cured
- Keep suction mats out of the bath
- Don’t leave a chip unrepaired
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Where the damage is and how we get to it
- The material
- How hard the colour is to match
- How many items we do on one visit
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Phone pictures are fine. Just make sure we can see:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- The material, if you know it
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
