Wrexham · Wales
Bath re-enamelling & resurfacing in Garden Village, Wrexham
Bath re-enamelling in Garden Village without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- The type of damage
- Whether we combine several jobs
- The material and finish
- Where the damage is and how we get to it
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- A close-up of the damage, in focus
- Natural light rather than flash
- The material, if you know it
- The postcode, so we can plan the visit
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
About our bath re-enamelling in Garden Village
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s wear marks under the taps and stains that won’t shift, we can generally put it right, on acrylic baths, pressed steel baths and basins & shower trays alike.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Garden Village (LL11, LL12)
- County
- Wrexham
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Garden Village
Garden Village is about 1 mile north-west of Wrexham, in Wrexham. Our repair technicians come to homes and businesses in Garden Village and the surrounding area, so nothing has to leave your home. Our technicians cover 115 places in Wrexham. Our nearest city page is Liverpool, about 24 miles away.
We cover every part of LL11 and LL12. Local streets include New Road, Lodge Road and East Avenue. If you are just outside Garden Village, we cover Little Acton (1 mile north-east), Rhosddu (1 mile south), Acton (1 mile east), Pandy (1 mile north) and Wrexham (1 mile south-east). Larger places within reach include Rhosllannerchrugog (4 miles south-west), Pentredŵr (5 miles south-west), Pant (5 miles south-west), Coedpoeth (3 miles west), Johnstown (4 miles south-west) and Ruabon (5 miles south).
Landmarks near Garden Village
We visit homes around Wat's Dyke C.P. School, Bellevue Park and The Acton Park pub. You’ll also find Rhosnesni High School (1 mile south-east), Grove Park School (0.9 miles south) and St Margaret's Church (less than half a mile south-east). Garden Village’s nearest station is Wrexham General station, about 0.8 miles south of the centre. Further afield, we also cover the area around Wrexham Maelor Hospital (1.2 miles south-west) and Castell y Gur (1.7 miles north). Open spaces near Garden Village include Pant-yr-ochain Big Pool and Wilderness Tip (Gresford).
Also in Garden Village
Common problems we fix in Garden Village
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
These are the problems we’re asked about most:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- Stains that will not shift
Questions to ask before booking
- A fixed price, and whether VAT is included
- If travel is included in the price
- What aftercare is recommended
- How soon you can use it again
Questions from Garden Village
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Wrexham.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How it works
We agree an arrival time beforehand. Once we are there, the work takes the best part of a day. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Before we arrive
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Point us to the nearest place to park
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
When we would advise against a repair
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- Leaks from fittings rather than the bath
- A bath that is rusted through
- A bath split right through the body
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Garden Village. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Garden Village
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- No need to remove anything
- Honest advice, even when it means no job
Take a look at our prices page or bath cost comparison.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
