Wrexham · Wales

Bath re-enamelling & resurfacing in Rhosllannerchrugog, Wrexham

Bath re-enamelling in Rhosllannerchrugog without the cost of replacing. Get a fixed price from your photos, then book a visit.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Rhosllannerchrugog homes

How we handle bath re-enamelling in Rhosllannerchrugog

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We are often asked to fix thin, worn enamel in places and a dull, rough surface that won’t come clean, in cast iron baths, pressed steel baths and acrylic baths.

Big or small, it’s backed by a one-year guarantee in Rhosllannerchrugog and across Wrexham.

Roll-top bath being refinished by a Surface Doctor technician
Area
Rhosllannerchrugog (LL14)
Region
Wrexham
Guarantee
One year on every repair
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

What a repair cannot fix

Not everything can be repaired, and we would rather say so up front. We can’t fix:

  • A bath split right through the body
  • A poorly supported acrylic bath, until it’s firmed up
  • Leaks from fittings rather than the bath

Send us pictures and we’ll tell you honestly before you book.

Materials we work on in Rhosllannerchrugog

  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays

Prices and what affects them

Resurfacing from £350. There’s no area surcharge for Rhosllannerchrugog. The price reflects:

  • Whether we combine several jobs
  • How hard the colour is to match
  • How many areas need work
  • The material and finish

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

It only takes a minute to photograph the damage. Try to send:

  • Any earlier repairs or coatings
  • Where you are, by postcode
  • One picture of the whole bath
  • Something in shot to show the size

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Landlord and trade work in Rhosllannerchrugog

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Common problems we fix in Rhosllannerchrugog

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

The most common problems we’re called about are:

  • An outdated colour you’d like to change
  • An old resurfacing that’s failing
  • Brown or grey marks that don’t clean off
  • Chips and rust in more than one place

Before you book anyone

  • What protection goes down before work starts
  • If travel is included in the price
  • Whether cleaning and preparation are in the price
  • Whether a trained technician does the job

Choosing a repair company

How the visit works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Tell us about parking, stairs or access
  • Keep pets and children out of the room while we work
  • Mention any earlier repairs or resurfacing

Ask for a price

If you’re in Rhosllannerchrugog and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Send photos for a quote

Advice

Your questions about bath re-enamelling in Rhosllannerchrugog

Is there any odour?

Expect a mild smell while we are working that clears as it cures.

What happens after I send pictures?

We review the pictures and send a fixed quote with dates.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, access to the room.

Can you price it without visiting?

Nearly always. If photos do not show enough, we’ll ask for another angle.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

Will the new finish last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

What does bath re-enamelling cost?

Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Can you repair several things at once?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

Covering Rhosllannerchrugog

Rhosllannerchrugog is about 4 miles south-west of Wrexham, in Wrexham. We travel to customers in Rhosllannerchrugog and nearby villages, so there is no workshop to go to. We work in 115 places across Wrexham, from the larger towns to small villages. You can also see our page for Liverpool, about 28 miles away.

Jobs in LL14 are booked in the same way as anywhere else. Jobs here include addresses on High Street, Ffordd y Dug and Windsor Road. Rhosllannerchrugog is on the B5097 and B5426, which makes it straightforward to reach. Close by, we cover Ponciau (1 mile north), Pentredŵr (1 mile west), Pant (1 mile south-west), Johnstown (1 mile east) and Pen-y-cae (1 mile south-west). We also work in nearby towns such as Wrexham (4 miles north-east), Caia Park (4 miles north-east), Offa (3 miles north-east), Rhosddu (4 miles north-east), Acton (5 miles north-east) and Little Acton (5 miles north-east). Being one of Wrexham’s larger places, Rhosllannerchrugog is somewhere we visit often.

Landmarks near Rhosllannerchrugog

Typical jobs here are in homes near The Horse & Jockey pub, St David's Welsh Church and Ysgol-Y-Grango and the streets around them. Rhosllannerchrugog’s nearest station is Ruabon station, about 1.6 miles south. Nearby you will also find Tŷ Pawb (3.5 miles north-east) and Cadwgan Castle (1.5 miles north). The countryside around Rhosllannerchrugog includes Monks Pool and Copperas.

Map of Rhosllannerchrugog © OpenStreetMap contributors

What your bath is made of matters

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Why repair rather than replace?

Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Why book with us

  • Everything repaired in place
  • Repair technicians who travel to you, UK-wide
  • Fixed prices from your pictures
  • Typically one visit, start to finish

Take a look at our prices page or guide to resurfacing and replacement costs.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.