Gwynedd · Wales
Bath re-enamelling & resurfacing in Garth, Gwynedd
Local bath re-enamelling for Garth: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
About our bath re-enamelling in Garth
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for staining under the taps and around the waste and a peeling or bubbling previous coating, on basins & shower trays, Victorian roll-tops and cast iron baths.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Garth (LL57, LL59)
- Region
- Gwynedd
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Garth
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How do I get a price for bath re-enamelling in Garth?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Our work in Garth
Garth is about 1 mile north-east of Bangor, in Gwynedd. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 165 places across Gwynedd. Our nearest city page is Liverpool, about 51 miles away.
Every address in LL57 and LL59 is covered, from the main roads to the quietest streets. You’ll find streets such as Orme Road, Love Lane and Beach Road, and we cover them all. If you’re just outside Garth, we cover Hirael (1 mile south-east), Upper Bangor (1 mile south-west), Glyn Garth (1 mile west), Maesgeirchen (1 mile south) and Bangor (1 mile south-west). Further out, we also cover Caernarfon (9 miles south-west), Bethesda (5 miles south-east), Gerlan (5 miles south-east), Braichmelyn (5 miles south-east), Llanbeblig (9 miles south-west) and Llanberis (8 miles south). Garth is among the bigger towns we cover in Gwynedd.
What’s near Garth
Typical jobs here are in homes near St Mary's Church, Ysgol Friars and Ysgol Tryfan. Also close by are Alice Williams Memorial Library (0.6 miles south-west), Former Garth Primary School (less than half a mile south), The Boatyard pub (within half a mile east) and Church of Our Lady and St James (0.8 miles south-west). The closest station to Garth is Bangor (Gwynedd) station, about 1 mile south-west of the centre. Further afield, we also cover the area around Minffordd Hospital (1.3 miles south) and Pier Camp (less than half a mile south-west). Not far away are Spinnies Nature Reserve and Bangor Mountain.
- Parks and local facilities nearby include Deiniol (0.7 miles south)
What we are called out for in Garth
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- Lots of chips and rust spots
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Questions to ask before you book
- The length of the guarantee and what it covers
- How to look after the finish
- How changes to the job are handled
- Who will actually do the work
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Also near Garth
What else we do in Garth
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- How hard the colour is to match
- The type of damage
The price reflects the work involved, not your postcode. You’ll see the full price before booking.
Getting a price from pictures
Phone photos are fine. Ensure they show:
- Whether it’s been repaired or coated before
- One picture of the entire bath
- What it’s made of, if you know
- Something in shot to show the size
To get a price, send two or three pictures using our quote form or call us. We will tell you honestly whether it can be repaired.
When we’d advise against a repair
A repair isn’t right for every job, including:
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
- A bath that is rusted through
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the next day. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
What you get with us
- Colours mixed by hand to suit your surface
- Work done at your home or business
- We leave the room as we found it
- No extra charge for your area
See our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
