Cheshire East · England
Bath Re-enamelling in Gleadsmoss
Full bath re-enamelling and resurfacing in Gleadsmoss, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Several chips and rust patches

How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We look at:
- What kind of damage it is
- The material
- The size and number of damaged areas
- The colour and finish to match
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed quote
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- Any earlier repairs or coatings
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
For a price in Gleadsmoss, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Bath re-enamelling in Gleadsmoss without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. If you’re dealing with a coloured bath you want in white and a bath that stays dull however much you clean it, we can help, whatever the material.
All of our repairs are guaranteed for twelve months in Gleadsmoss and everywhere else. We return to put right any problem with the work.

- Location
- Gleadsmoss (SK11)
- Area hub
- Cheshire East
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
- Do not leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Honest limits
To be straight with you, there are a few things a repair will not fix:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Gleadsmoss
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Signs you need bath re-enamelling in Gleadsmoss
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Most people get in touch when they notice something like this:
- An old resurfacing that’s failing
- Wear marks under the taps
- A coloured bath you want in white
- Lots of chips and rust spots
Comparing quotes
- What the guarantee covers, and for how long
- What protection goes down before work starts
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Gleadsmoss. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- No need to remove anything
- Fixed prices from your photos
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
See our pricing and guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Gleadsmoss
Can you repair something that’s been repaired before?
Normally, yes. The old repair comes out first, so mention it when you send pictures.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Cheshire East and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Gleadsmoss and the surrounding area
Gleadsmoss is about 4 miles north-west of Congleton, in Cheshire East. Our technicians come to homes and businesses in Gleadsmoss and nearby villages, so there’s no workshop to go to. Our repair technicians cover 254 places in Cheshire East. You can also see our page for Manchester, about 18 miles away.
Postcode districts we cover here: SK11. Close by, we cover Swettenham Heath (1 mile south), Kermincham Heath (1 mile west), Lower Withington (1 mile north), Swettenham (1 mile south-west) and Hodgehill (1 mile north-east). Within a short drive, we also cover Crewe (11 miles south-west), Macclesfield (7 miles north-east), Congleton (4 miles south-east), Wilmslow (8 miles north), Nantwich (14 miles south-west) and Knutsford (7 miles north-west).
What’s near Gleadsmoss
Gleadsmoss’s nearest station is Goostrey station, about 2.3 miles west of the centre. Nearby you’ll also find Parkside Hospital (6 miles north-east). The countryside around Gleadsmoss includes Astbury Mere and Swettenham Meadows Nature Reserve.
Also near Gleadsmoss
Also in Gleadsmoss
About our accreditations · Every repair comes with a one-year guarantee.

