Merthyr Tydfil · Wales
Bath Re-enamelling in Glebeland
Bath re-enamelling for Glebeland, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
Bath re-enamelling at your home in Glebeland
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s chips and rust in more than one place and an old resurfacing that’s failing, we can help, whatever the material.
Whatever the size of the job, it’s backed by a one-year guarantee in Glebeland and across Merthyr Tydfil.
- Location
- Glebeland (CF47, CF48)
- County
- Merthyr Tydfil
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
Ask for a price
Send us pictures of the damage and a wider shot of the entire item, with your CF47 postcode, and we will reply with a fixed price.
Advice
Places near Glebeland
Also in Glebeland
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Glebeland questions
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
How long will the bath be out of use?
One day for most baths, ready the next day. We’ll confirm timings when we quote.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Are there extra charges for Glebeland?
Travel is included in the price, and we charge the same wherever you are.
When to call us in Glebeland
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
Most people get in touch when they notice something like this:
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Wear marks under the taps
Comparing quotes
- Whether the price covers travel
- What preparation is included
- Who turns up on the day
- Whether the colour is mixed to match
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Landlords, agents and businesses in Glebeland
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams in Merthyr Tydfil and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Where we work around Glebeland
Glebeland is about 1 mile south of Merthyr Tydfil, in Merthyr Tydfil. We travel to homes and businesses in Glebeland, so nothing has to leave your home. Glebeland is one of 52 places in Merthyr Tydfil we cover.
Every address in CF47 and CF48 is within our area, from the main roads to the quietest streets. From High Street, Vulcan Road and Luther Lane or a nearby road, a technician can come to you. Being close to the A4054 and A4102, Glebeland is simple for us to get to. If you are just outside Glebeland, we cover Thomastown (1 mile south-east), Ynys-fach (1 mile west), Morgantown (1 mile north), Pont Morlais (1 mile north-east) and Cae-draw (1 mile south). Within a short drive, we also cover Treharris (7 miles south-east), Nelson (8 miles south-east), Pentwynberth-lwyd (7 miles south-east), Trelewis (7 miles south-east), Aberfan (4 miles south) and Troedyrhiw (3 miles south-east). Being one of Merthyr Tydfil’s larger places, Glebeland sees plenty of our work.
Local landmarks in Glebeland
Around Glebeland, we work in homes near VNU pub, The Guest Keen and St Mary's R.C. Primary School and the streets around them. Also close by are Cyfarthfa High School (less than half a mile east) and St David's Church (under half a mile east). There’s a railway station in Glebeland itself: Merthyr Tydfil station. A little further out are Ynysfach Engine House (less than half a mile south-west) and Morlais Castle (2.1 miles north). Open spaces near Glebeland include Pwll Waun Cynon and Mynydd Aberdar.
What affects the price in Glebeland
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- Access to the area
- The size and number of damaged areas
- What the surface is made of
- What kind of damage it is
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- The material, if you know it
For a price in Glebeland, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
