Lincolnshire · England

Bath Re-enamelling in Glentham

Full bath re-enamelling and resurfacing at your home in Glentham, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Glentham

How we handle bath re-enamelling in Glentham

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for an original cast iron bath that needs restoring and enamel that’s lost its shine and feels rough, in acrylic baths, cast iron baths and basins & shower trays.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Before and after: an old basin refinished to bright white
Area
Glentham (LN8)
County
Lincolnshire
Guarantee
One year on every repair
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Do you need bath re-enamelling in Glentham?

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

These are the problems we are asked about most:

  • An old resurfacing that is failing
  • Enamel that is lost its shine and feels rough
  • Several chips and rust patches
  • Staining under the taps and around the waste

What your quote should include

  • The length of the guarantee and what it covers
  • Whether a trained technician does the job
  • How the colour is matched
  • How changes to the job are handled

Our hiring checklist

How it works

Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. It normally takes the best part of a day, and you’re welcome to carry on with your day while we work.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Open a window if you can
  • Clear the area around the damage
  • Tell us about any previous repairs or coatings

Ask for a price

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Get a free quote

Advice

Landlords, agents and businesses in Glentham

We are used to working with agents and managing companies. Just send photos, the address and how to get access.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

What we can’t put right

Some jobs aren’t right for a repair, for example:

  • An acrylic bath that flexes badly underfoot
  • A bath split right through the body
  • Leaks from fittings rather than the bath

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Avoid suction-cup mats
  • Stick to gentle, non-abrasive cleaners
  • Wash away dyes and oils after use
  • Store bottles off the bath

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.

Do not try to scrub a worn bath back to shine. It removes more of the surface.

What bath re-enamelling costs

Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:

  • The size and number of damaged areas
  • How many items we do on one visit
  • How easy the damage is to reach
  • Previous DIY repairs that have to come out

We charge the same wherever you are, with no extra for Glentham. What changes the price is the job itself: the material, the amount of damage and how many items.

Send photos for a quote

Before you send photos, these tips help us give you a firm price:

  • Where you are, by postcode
  • A picture taken from further back
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know

Upload a picture of the damage and a wider shot of the entire item, with your LN8 postcode, and we’ll come back with a fixed quote.

Questions from Glentham

Can a failed resurfacing be redone?

Yes. Removing the old finish takes extra time, which we include in the price.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside if you’d like.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.

Can you redo someone else’s repair?

Yes, we often do. Removing the old work can add time, and that’s in the quote.

How quickly can you book me in?

We will give you dates with your quote. Tell us if you need it done quickly.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

About Glentham

Glentham is about 11 miles east of Gainsborough, in Lincolnshire. Whether you’re in the middle of Glentham or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Glentham is one of 732 places in Lincolnshire we cover. You can also see our page for Leeds, about 52 miles away.

Jobs in LN8 work the same way as everywhere else we cover. We regularly work on streets such as High Street, Bishop Norton Road and Washdyke Lane and the roads around them. If you’re just outside Glentham, we cover Normanby-by-Spital (2 miles south), Bishop Norton (2 miles north-west), Caenby (2 miles south), Atterby (2 miles north-west) and Owmby-by-Spital (2 miles south). Larger places within reach include Lincoln (13 miles south), Gainsborough (11 miles west), Birchwood (14 miles south), Ermine (11 miles south), Bracebridge Heath (15 miles south) and Market Rasen (7 miles east).

Local landmarks in Glentham

In Glentham, that means homes near Church of St Peter and St Paul. A little further out are Medieval castle and ecclesiastical complex (3.7 miles east) and Bomber County Aviation Museum (3.3 miles west).

Map of Glentham © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.