Northamptonshire · England
Bath re-enamelling & resurfacing in Glooston, Northamptonshire
Bath re-enamelling across Glooston and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
Your questions about bath re-enamelling in Glooston
What happens once I’ve sent pictures?
You will get a fixed quote back. There’s no obligation to book.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Do you work in Glooston?
Yes. We cover the whole UK and come to Glooston. Send us pictures for a fixed quote, or call 0345 017 0787.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Bath re-enamelling in Glooston without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on acrylic baths, basins & shower trays and Victorian roll-tops, and people most often call us about an original cast iron bath that needs restoring and worn patches where water runs and sits.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Area
- Glooston (LE16)
- Region
- Northamptonshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Honest limits
It helps to know what we can’t do:
- Leaks from fittings rather than the bath
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Looking after it afterwards
It’s all simple stuff:
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What happens on the day
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Get a quote
Send us a photo of the damage and one of the entire item, with your LE16 postcode, and we’ll reply with a fixed price.
Advice
Also in Glooston
Common problems we fix in Glooston
Frequently the bath has just had decades of use. The body of the bath is usually perfectly sound.
The most common problems we are called about are:
- A dull, rough surface that will not come clean
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
Before you book anyone
- How soon you can use it again
- Who turns up on the day
- Aftercare advice
- What happens if the damage is worse than the pictures show
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- How many areas need work
- Whether we combine several jobs
- The material
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
How to get a fixed price
You can usually get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Repair or replace in Glooston?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- One-year guarantee on every repair
- One visit for most repairs
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
Take a look at our pricing or resurfacing vs replacement cost guide.
Covering Glooston
Glooston is about 5 miles north of Market Harborough, in Northamptonshire. Across the LE16 area, we come to you. Our technicians cover all 364 towns and villages across Northamptonshire. You can also see our page for Birmingham, about 42 miles away.
Every address in LE16 is within our area. From Main Street, Bluebell Lane and Cranoe Road or a nearby road, a technician can come to you. Nearby, we also work in Cranoe (1 mile south-east), Goadby (2 miles north), Slawston (2 miles south-east), Welham (2 miles south-east) and Hallaton (2 miles east). Larger places within reach include Corby (9 miles south-east), Kettering (13 miles south-east), Market Harborough (5 miles south), Desborough (8 miles south), Rothwell (10 miles south-east) and Little Bowden (6 miles south).
What’s near Glooston
Our customers here include homes close to The Old Barn Inn and Church of St John the Baptist, among other places. Further afield, we also cover the area around Kibworth Harcourt Castle (4.4 miles west) and Hallaton Museum (2.3 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
