Surrey · England
Bath Re-enamelling in Grayswood
Full bath re-enamelling and resurfacing in Grayswood, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
What affects the price in Grayswood
Resurfacing from £350. We charge the same across the UK, including Grayswood. The price reflects:
- How many items we do on one visit
- Previous DIY repairs that have to come out
- How much damage there is
- The type of damage
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
Two or three clear photos are usually enough. It helps if you send:
- The postcode, so we can plan the visit
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Upload pictures of the damage and a wider shot of the whole item, with your GU27 postcode, and we’ll reply with a fixed quote.
How we handle bath re-enamelling in Grayswood
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, and can be used again the following day. Our technicians work on Victorian roll-tops, basins & shower trays and pressed steel baths, and common reasons people get in touch are enamel that’s lost its shine and feels rough and a period or roll-top bath worth keeping.
Big or small, it’s backed by a one-year guarantee.
- Area
- Grayswood (GU27)
- County
- Surrey
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Grayswood
What else we do in Grayswood
Do you need bath re-enamelling in Grayswood?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The things customers usually mention when they call are:
- Worn patches where water runs and sits
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Before booking anyone
- How to look after the finish
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
FAQs for Grayswood
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
What areas do you cover?
Everywhere in the UK, Grayswood included. There is no extra charge for travel.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will there be a smell?
Expect a mild smell while we’re working.
Where we work around Grayswood
Grayswood is about 9 miles south-east of Farnham, in Surrey. Our technicians come to homes and businesses in Grayswood and the surrounding area, so you do not need to take anything anywhere. We work in 395 places in Surrey, from the larger towns to small villages. Our nearest city page is London, about 37 miles away.
We cover every part of GU27. Local streets include Lower Road, Ash Tree Close and The Mount. Other places close to Grayswood include Brook (2 miles north-east), Bowlhead Green (2 miles north), Chiddingfold (2 miles east), Sandhills (2 miles north-east) and Wormley (3 miles north-east). We also work in nearby towns such as Guildford (11 miles north-east), Farnham (9 miles north-west), Frimley (15 miles north), Cranleigh (9 miles east), Ash (10 miles north) and Godalming (6 miles north-east).
Around Grayswood
Typical jobs here are in homes near The Wheatsheaf Inn, Grayswood Church of England (Aided) Primary School and All Saints' Church, among other places. The nearest railway station is Haslemere station, roughly 1.7 miles south-west of the centre. Nearby you’ll also find Haslemere and District Hospital (1.2 miles south-west). Not far away are Lynchmere Commons and Gibbet Hill.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What happens on the day
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
Honest limits
To be straight with you, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.
Why book with us
- Same prices wherever you are
- Normally one visit, start to finish
- Every repair guaranteed for a year
- A fixed quote before booking
Take a look at our prices page or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
