Milton Keynes · England
Bath re-enamelling & resurfacing in Great Horwood, Milton Keynes
Full bath re-enamelling and resurfacing at your home in Great Horwood, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that’s seen better days
About our bath re-enamelling in Great Horwood
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We regularly repair basins & shower trays, pressed steel baths and Victorian roll-tops, and the jobs we see most are brown or grey marks that don’t clean off and worn patches where water runs and sits.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Location
- Great Horwood (MK17)
- County
- Milton Keynes
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Great Horwood questions
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
Do you need bath re-enamelling in Great Horwood?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Common reasons people in Great Horwood contact us are:
- An old resurfacing that’s failing
- Thin, worn enamel in places
- A coloured bath you want in white
- Lots of chips and rust spots
What your quote should include
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- How soon you can use it again
- Whether a trained technician does the job
Also near Great Horwood
More services for Great Horwood
Our work in Great Horwood
Great Horwood is about 5 miles east of Buckingham, in Milton Keynes. We travel to homes and businesses in Great Horwood and nearby villages, so you do not need to take anything anywhere. We work in 73 places across Milton Keynes, from the larger towns to small villages. Our jobs stretch from Great Horwood to London (47 miles away).
All of MK17 is within our area, from the main roads to the quietest streets. Local streets include High Street, The Green and Willow Road, all of which we cover. Nearby, we also work in Little Horwood (1 mile east), Nash (2 miles north), Winslow (2 miles south), Whaddon (3 miles north-east) and Swanbourne (3 miles south-east). Within a short drive, we also cover Milton Keynes (6 miles north-east), Bletchley (6 miles east), Newport Pagnell (10 miles north-east), Bletchley and Fenny Stratford (7 miles east), Furzton (5 miles north-east) and Whitehouse (5 miles north-east).
Near you in Great Horwood
Typical jobs here are in homes near Church of St James, The Crown pub and Great Horwood Church of England School and the streets around them. Nearby you’ll also find Buckingham Community Hospital (5 miles north-west) and Drayton Parslow Mound (4.2 miles south-east). Not far away are Buckingham Sand Pit.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Honest limits
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Great Horwood
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes the best part of a day for most jobs. The room is left tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
Ask for a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Repair or replace in Great Horwood?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why us?
- CHAS and Constructionline accredited
- Everything repaired in place
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
Read our full price list and bath cost comparison.
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- Whether we combine several jobs
- How hard the colour is to match
- The material
- What kind of damage it is
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Two or three clear photos are normally enough. Try to include:
- A clear, close picture of the problem area
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
