Norfolk · England
Bath re-enamelling & resurfacing in Gressenhall, Norfolk
Local bath re-enamelling for Gressenhall: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coloured bath you want in white
Bath re-enamelling at your home in Gressenhall
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. If you are dealing with enamel that’s lost its shine and feels rough and an outdated colour you’d like to change, we can normally put it right.
All our work is covered by our one-year guarantee.
- Area
- Gressenhall (NR20)
- County
- Norfolk
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Gressenhall
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Keep an eye out for any of the following:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- Wear marks under the taps
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Most jobs done in one visit
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Read our prices page or bath cost comparison.
Places near Gressenhall
Also in Gressenhall
What happens on the day
We agree an arrival time beforehand. On site, it takes a full day. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Related advice
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs immediately
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- The colour and finish to match
- Where the damage is and how we get to it
- What the surface is made of
- How much damage there is
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Send pictures for a quote
Before you send pictures, these tips help us give you a firm price:
- The material, if you know it
- A close-up of the damage, in focus
- Something in shot to show the size
- One picture of the whole bath
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Gressenhall and the surrounding area
Gressenhall is about 3 miles north-west of Dereham, in Norfolk. From the centre of Gressenhall to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Gressenhall is one of 797 places in Norfolk where we work.
All of NR20 is covered, from the main roads to the quietest streets. That includes homes on Drift Lane, Park Road and Hall's Drive and the roads around them. Neighbouring places we cover include Beetley (1 mile east), Old Brigg (1 mile south), Old Beetley (1 mile north-east), Hoe (2 miles east) and North Elmham (3 miles north-east). We also work in nearby towns such as Dereham (3 miles south-east), Wymondham (13 miles south-east), Attleborough (15 miles south), Watton (10 miles south), Hethersett (14 miles south-east) and Swaffham (10 miles south-west).
What’s near Gressenhall
Typical jobs here are in homes near St Mary's Community Primary School, Northgate High School and Church of St Mary, among other places. Further afield, we also cover the area around Mileham Castle (3.3 miles north-west) and Gressenhall Farm and Workhouse (0.7 miles east). Green spaces nearby include Hoe Rough.
Honest limits
In fairness, some problems need a different fix:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
FAQs for Gressenhall
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your NR20 postcode.
Can you fix a peeling bath coating?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What areas do you cover?
We work UK-wide, so Gressenhall is covered. Prices do not change with location.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
