Lincolnshire · England
Bath re-enamelling & resurfacing in Grimoldby, Lincolnshire
We travel to Grimoldby for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
Grimoldby and the surrounding area
Grimoldby is about 4 miles east of Louth, in Lincolnshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 732 towns and villages in Lincolnshire. Our jobs stretch from Grimoldby to Leeds (about 74 miles away).
Here we cover the LN11 postcode area. Local streets include Orchard Park, Meadow Close and Hawthorne Close. You will find Grimoldby on the B1200, which makes it straightforward to reach. If you are just outside Grimoldby, we cover Manby (1 mile south-east), South Cockerington (1 mile north-west), Stewton (2 miles west), North Cockerington (2 miles north-west) and North Reston (3 miles south). We also work in nearby towns such as Louth (4 miles west), New Waltham (13 miles north-west), Horncastle (14 miles south-west), Mablethorpe (7 miles east), Humberston (12 miles north-west) and Sutton on Sea (9 miles south-east).
Landmarks near Grimoldby
In Grimoldby, that means homes near Grimoldby Primary School and Church of St Edith. Nearby you’ll also find County Hospital Louth (4.2 miles west).
Bath re-enamelling in Grimoldby without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on cast iron baths, basins & shower trays and pressed steel baths, and people most often call us about chips and rust in more than one place and worn patches where water runs and sits.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Where
- Grimoldby (LN11)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Grimoldby
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Technicians who travel to you, UK-wide
- Colour-matched on site
- Same prices wherever you are
- Nothing taken out or refitted
Take a look at our prices page and resurfacing vs replacement cost guide.
Also near Grimoldby
More services for Grimoldby
Grimoldby questions
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is there any odour?
Expect a mild smell while we are working.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What we do, step by step
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. It normally takes a full day, and we’ll tell you if anything changes.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the day after.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- How many areas need work
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Before you send pictures, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Signs you need bath re-enamelling in Grimoldby
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
People typically call us after spotting one of these:
- A roll-top that’s seen better days
- A coating lifting around the plughole
- Worn patches where water runs and sits
- Stains that won’t shift
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- How your room will be protected
- If travel is included in the price
Landlords, agents and businesses in Grimoldby
If you manage property in Grimoldby, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
What a repair cannot fix
Some jobs aren’t right for a repair, including:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we will say what we think.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
