Lincolnshire · England
Bath Re-enamelling in Louth
We travel to Louth for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Covering Louth
Louth is about 14 miles south of Grimsby, in Lincolnshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Louth is one of 732 towns and villages in Lincolnshire where we work. We work right across the region, from Louth to Leeds (about 71 miles away).
Postcode districts we cover here: LN11. That includes homes on Market Place, London Road and Alexandra Road and the roads around them. Being close to the A16 and B1200, Louth is simple for us to get to. Neighbouring places we cover include Keddington (1 mile north-east), Brackenborough (2 miles north), Stewton (2 miles east), Hallington (2 miles south-west) and Raithby (2 miles south-west). Within a short drive, we also cover New Waltham (11 miles north), Horncastle (12 miles south-west), Mablethorpe (11 miles east), Humberston (12 miles north), Sutton on Sea (12 miles east) and Market Rasen (14 miles west). Louth is among the bigger towns we cover in Lincolnshire.
What’s near Louth
We visit homes around Monks' Dyke Tennyson College, Holy Trinity Church and St Michael's Church of England School, among other places. Nearby too are Hubbard's Hills (1.2 miles south-west), Wolds College (less than half a mile north-west) and The Lincolnshire Poacher Hotel (under half a mile north-east). Further afield, we also cover the area around County Hospital Louth (0.5 miles north-west) and Louth Museum (within half a mile west).
Bath re-enamelling in Louth without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s chips and rust in more than one place and a coating lifting around the plughole, we can typically put it right, on pressed steel baths, cast iron baths and basins & shower trays alike.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Louth (LN11)
- County
- Lincolnshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Landlords, letting agents and housing providers in Louth use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes the best part of a day for most jobs. We leave the room clean and ready to use once it has cured.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Have a window or extractor fan available
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Read more
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Other services in Louth
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Have chips seen to early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Signs you need bath re-enamelling in Louth
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Comparing quotes
- Who turns up on the day
- If travel is included in the price
- What happens if the damage is worse than the photos show
- How to look after the finish
FAQs for Louth
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Which areas do you work in?
All of Lincolnshire, and the rest of the UK. There is no extra charge for travel.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you cover Louth?
Yes. We work across the UK and travel to Louth and the rest of Lincolnshire. Send photos and we’ll quote, or call 0345 017 0787.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
What we cannot put right
It helps to know what we cannot do:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- A bath split right through the body
Send us photos and we’ll tell you honestly.
Materials we work on in Louth
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there’s no premium for Louth. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Typically one visit, start to finish
- We leave the room as we found it
- Colours mixed by hand to suit your surface
- Repair technicians who travel to you, UK-wide
Read our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
