Suffolk · England

Bath re-enamelling & resurfacing in Groton, Suffolk

Our repair technicians come to Groton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Groton

Bath re-enamelling in Groton without replacing anything

If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Typical jobs include a bath that stays dull however much you clean it and thin, worn enamel in places, across cast iron baths, acrylic baths and Victorian roll-tops.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Groton (CO10)
Region
Suffolk
Guarantee
A year, on every repair
Quote
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

FAQs for Groton

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

How do I book?

Use the quote form or ring 0345 017 0787.

What areas do you cover?

All of Suffolk, and the rest of the UK. There’s no extra charge for travel.

Do you cover Groton?

Yes, we do. Repair technicians travel to Groton from across the region, and the price is the same as everywhere else.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

What we do, step by step

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a full day, including clearing up.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on
  • Let us know if it has been repaired before

Getting a price

Email us pictures of the damage and a wider shot of the entire item, with your CO10 postcode, and we’ll come back with a fixed quote.

Get a free quote

Advice

How we price bath re-enamelling

Prices start from £350. You won’t pay by the hour. The price is based on:

  • Whether old repairs or coatings need taking off
  • Doing more than one item at once
  • Whether it’s a chip, crack, burn or wear
  • The material

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • Any earlier repairs or coatings
  • Something in shot to show the size
  • A picture taken from further back
  • A clear, close picture of the problem area

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.

How to look after the repair

Good habits make a big difference to how long a repair lasts:

  • A dripping tap should be fixed promptly
  • Use washing-up liquid and a soft cloth
  • Get any chip repaired quickly
  • Wash away dyes and oils after use

Dry the bath after use if possible, and rinse off any bath products.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

Should you replace it?

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • Fixed prices from your photos
  • CHAS and Constructionline accredited
  • We leave the room as we found it
  • One visit for most repairs

Read our prices page and bath cost comparison.

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • Leaks from fittings rather than the bath
  • Holes rusted through the metal
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

When to call us in Groton

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

Clients generally contact us about:

  • Worn patches where water runs and sits
  • A period or roll-top bath worth keeping
  • An outdated colour you’d like to change
  • An old resurfacing that is failing

Comparing quotes

  • How the colour is matched
  • How soon you can use it again
  • Aftercare advice
  • Whether there are any call-out or travel charges

Our hiring checklist

About Groton

Groton is about 5 miles east of Sudbury, in Suffolk. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 731 places in Suffolk. You can also see our page for London, about 55 miles away.

Every address in CO10 is covered. We regularly work on streets such as Church Street and Groton Street and the roads around them. Other places close to Groton include Sherbourne Street (1 mile south-west), Boxford (1 mile south), Calais Street (2 miles south-east), Stone Street (2 miles south) and Whitestreet Green (2 miles south-east). We also work in nearby towns such as Ipswich (13 miles east), Sudbury (5 miles west), Stowmarket (12 miles north-east), Hadleigh (4 miles east), Stoke (13 miles east) and Maidenhall Estate (12 miles east).

Around Groton

In Groton, that means homes near Church of St Bartholomew and White Horse Inn and the streets around them. Further afield, we also cover the area around Lindsey Castle (1.7 miles north-east). Not far away are Groton Wood.

Map of Groton © OpenStreetMap contributors

For landlords and businesses

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.