Somerset · England
Bath Re-enamelling in Hackness
Full bath re-enamelling and resurfacing for homes and businesses in Hackness and across Somerset. Send photos for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Hackness
We don’t move the bath, so the taps, tiles and plumbing are not touched. It usually takes one visit, and can be used again the following day. Whether it’s a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, we can normally put it right.
A one-year guarantee comes as standard.
- Location
- Hackness (TA9)
- Area hub
- Somerset
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. It usually takes a full day, and you’re welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the day after.
Before we arrive
- Have a window or extractor fan available
- Let us know about parking or access
- Let the surface dry out before the visit
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
What we cannot put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Hackness
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
What affects the price in Hackness
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- How much damage there is
- Doing more than one item at once
- How hard the colour is to match
- What kind of damage it is
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- The material, if you know it
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Questions from Hackness
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What areas do you cover?
The entire UK, including all of Somerset. Just include your postcode and we’ll confirm dates.
Places near Hackness
Also in Hackness
Keeping it looking good
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs straight away
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
- Keep suction mats out of the bath
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Should you replace it?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Straight answers about what a repair can do
- Usually one visit, start to finish
- No need to remove anything
- Every repair guaranteed for a year
Read our prices page or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Hackness
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Hackness as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Do you need bath re-enamelling in Hackness?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
Signs it’s time to call us include:
- Wear marks under the taps
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
What to look for in a quote
- How long it needs to cure
- How to look after the finish
- Whether a trained technician does the job
- What prep work is covered
Where we work around Hackness
Hackness is about 3 miles south-east of Burnham-on-Sea, in Somerset. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in all 640 towns and villages across Somerset.
All of TA9 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include East Huntspill (1 mile south-east), Bason Bridge (1 mile east), Watchfield (1 mile north-east), Alstone (1 mile north-west) and Highbridge (1 mile north-west). We also work in nearby towns such as Taunton (15 miles south-west), Bridgwater (6 miles south), Burnham-on-Sea (3 miles north-west), Wells (13 miles east), Street (11 miles south-east) and Glastonbury (11 miles east).
Local landmarks in Hackness
Locally, our jobs take us to homes close to East Huntspill School, Church of All Saints and The Basonbridge Inn. The closest station to Hackness is Highbridge & Burnham station, roughly 1.1 miles north-west. Further afield, we also cover the area around Burnham on Sea War Memorial Hospital (2.8 miles north-west). The countryside around Hackness includes WWT Steart Marshes.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
