Derbyshire · England

Bath Re-enamelling for Hadfield homes

We travel to Hadfield for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Hadfield

Signs you need bath re-enamelling in Hadfield

Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.

If you can see any of these, send us a picture:

  • Worn patches where water runs and sits
  • Several chips and rust patches
  • Enamel that is lost its shine and feels rough
  • A coating lifting around the plughole

What your quote should include

  • How the room is protected while they work
  • What preparation is included
  • Is the price fixed, and does it include VAT?
  • The length of the guarantee and what it covers

Our hiring checklist

Bath re-enamelling in Hadfield without replacing anything

Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with worn patches where water runs and sits and an outdated colour you’d like to change, we can normally put it right, whatever the material.

A one-year guarantee comes as standard, so you’re covered after the visit.

Where
Hadfield (SK13)
Region
Derbyshire
Guarantee
12 months on all our work
Quotes
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Honest limits

A few problems are outside what a surface repair can do:

  • Steel that has corroded right through
  • Leaks from fittings rather than the bath
  • A poorly supported acrylic bath, until it’s firmed up

Send us photos and we will tell you honestly.

Surfaces we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths

Hadfield and nearby

Hadfield is about 2 miles north-west of Glossop, in Derbyshire. We travel to homes and businesses in Hadfield and nearby villages, so nothing has to leave your home. Hadfield is one of 532 towns and villages in Derbyshire we cover. Our nearest city page is Manchester, about 10 miles away.

We cover every part of the SK13 postcode area. From Station Road, Walker Street and Spring Gardens or anywhere nearby, we can come to you. We also cover the places around Hadfield: Brosscroft (1 mile north), Padfield (1 mile east), Tintwistle (1 mile north), Hollingworth (1 mile west) and Higher Dinting (1 mile south). Within a short drive, we also cover Buxton (14 miles south), New Mills (7 miles south), Chapel-en-le-Frith (10 miles south), Whaley Bridge (9 miles south), Ollersett (6 miles south) and Tideswell (15 miles south-east).

What’s near Hadfield

In Hadfield, that means homes near St Andrew, St Philip Howard Catholic Voluntary Academy and Manor Park, among other places. Other local landmarks include The Spinners Arms Public House (under half a mile south-west), Longdendale High School (1.2 miles west) and St Andrew's CofE Junior School (within half a mile south-west). There’s a railway station in Hadfield itself: Hadfield station. Nearby you will also find Shire Hill Hospital (1.4 miles east) and Longdendale (1.8 miles west). Green spaces nearby include Swallows Wood and Wild Bank.

Map of Hadfield © OpenStreetMap contributors

Repair or replace: which is better?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.

Why Hadfield customers choose us

  • Technicians who travel to you, UK-wide
  • One-year guarantee on every repair
  • Straight answers about what a repair can do
  • Free fixed quotes from pictures

See our full price list or guide to resurfacing and replacement costs.

How it works

Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes the best part of a day.

  1. The room is masked, protected and ventilated.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can generally be used the day after.

Preparing for the visit

  • Make sure the area is dry
  • Let us know about parking or access
  • Mention any earlier repairs or resurfacing

Ask for a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a fixed quote

Advice

What bath re-enamelling costs

Prices start from £350. Every quote is fixed and free. What we look at:

  • How much damage there is
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

A couple of clear pictures is all it takes. It helps if you send:

  • Natural light rather than flash
  • A close-up of the damage, in focus
  • Any details about the material
  • A wider photo showing the entire bath

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Your questions about bath re-enamelling in Hadfield

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Will the new finish last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

How long will the bath be out of use?

Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

It’s been repaired before. Can you still fix it?

Usually, yes. The old repair comes out first, so let us know about it.

Will the bath be moved?

No. We resurface it in place, so nothing else is disturbed.

Are there extra charges for Hadfield?

We do not add a call-out fee. The fixed price covers the visit and the work.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.