Cambridgeshire · England
Bath re-enamelling & resurfacing in Hail Weston, Cambridgeshire
Full bath re-enamelling and resurfacing at your home in Hail Weston, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that is failing
- Worn patches where water runs and sits
Bath re-enamelling in Hail Weston, done in place
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We work on pressed steel baths, Victorian roll-tops and acrylic baths, and common reasons people contact us are a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Hail Weston (PE19)
- Area hub
- Cambridgeshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Hail Weston
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, usually first under the taps and around the waste.
Look out for these signs:
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Comparing quotes
- What protection goes down before work starts
- Whether the price covers travel
- What aftercare is recommended
- How soon you can use it again
Also near Hail Weston
More services for Hail Weston
Honest limits
Before booking, it’s worth knowing the limits too:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Hail Weston as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
About Hail Weston
Hail Weston is about 2 miles north-west of St Neots, in Cambridgeshire. Anywhere in PE19, we come to you. Hail Weston is one of 371 towns and villages in Cambridgeshire where we work. Our jobs stretch from Hail Weston to London (about 52 miles away).
Jobs in PE19 are booked in the same way as anywhere else. Jobs here include addresses on High Street, Orchard Close and Green Lane. Other places close to Hail Weston include Eaton Ford (1 mile south), Little Paxton (1 mile east), Eaton Socon (2 miles south), Southoe (2 miles north-east) and St Neots (2 miles south-east). Larger places within reach include Huntingdon (8 miles north-east), St Ives (11 miles north-east), Cambourne (10 miles east), Godmanchester (7 miles north-east), Brampton (6 miles north-east) and Sawtry (13 miles north).
Local landmarks in Hail Weston
In Hail Weston, that means homes near Crosshall Infant School Academy, Parish Church of St Nicholas and Longsands Academy, among other places. Hail Weston’s nearest station is St Neots station, roughly 2.3 miles south-east. A little further out are Boughton (2.6 miles north-east) and Eaton Socon Rural District (1.9 miles south). Green spaces nearby include Paxton Pits Nature Reserve.
How the visit works
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. It typically takes a full day, and you are welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the following day.
How to prepare
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Let us know about parking or access
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Keeping it looking good
After the repair has cured, a few habits help it last:
- Don’t leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
FAQs for Hail Weston
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How long will the bath be out of use?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- How hard the colour is to match
- The material and finish
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- A photo taken from further back
- Any earlier repairs or coatings
- The material, if you know it
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
