Worcestershire · England
Bath re-enamelling & resurfacing in Hanbury, Worcestershire
Bath re-enamelling in Hanbury without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
About our bath re-enamelling in Hanbury
We do not move the bath, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. Our repair technicians work on acrylic baths, Victorian roll-tops and cast iron baths, and the jobs we see most are a dull, rough surface that won’t come clean and staining under the taps and around the waste.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Area
- Hanbury (B60)
- Region
- Worcestershire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
So the finish stays in good condition:
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
- A quick wipe after use keeps limescale away
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Hanbury questions
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Do you cover the whole of Worcestershire?
We cover the whole UK, including Hanbury and the rest of Worcestershire. Send your postcode with your pictures and we’ll offer you dates.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
When to call us in Hanbury
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Send us a picture if you notice any of these:
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
What to look for in a quote
- How your room will be protected
- What preparation is included
- How to look after the finish
- A fixed price, and whether VAT is included
What we do, step by step
We agree an arrival time beforehand. Once we’re there, the work takes the best part of a day. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Advice
Landlord and trade work in Hanbury
We carry out planned and one-off repairs for housing associations and facilities teams in Worcestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around Hanbury, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Honest limits
We’d rather lose a job than do one that won’t last, so these are the limits:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Hanbury. What changes the price is:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- Details of any past repairs
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Towns and villages near Hanbury
Other services in Hanbury
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Hanbury and nearby
Hanbury is about 4 miles east of Droitwich Spa, in Worcestershire. Our technicians come to clients in Hanbury and the surrounding area, so there is no workshop to go to. We work in 376 places in Worcestershire, from the larger towns to small villages. Our jobs stretch from Hanbury to Birmingham (16 miles away).
Our visits in B60 are booked in the same way as anywhere else. From Pumphouse Lane, Hanbury Croft and Courts Close or anywhere nearby, a technician can come to you. We also cover the places around Hanbury: Mere Green (1 mile south-west), Sharpway Gate (1 mile north), Broughton Green (2 miles south), Bradley Green (2 miles south-east) and Woodgate (2 miles north). We also work in nearby towns such as Worcester (8 miles south-west), Redditch (6 miles north-east), Kidderminster (12 miles north-west), Bromsgrove (5 miles north), Great Malvern (15 miles south-west) and Droitwich Spa (4 miles west).
Landmarks near Hanbury
In Hanbury, that means homes near St Mary the Virgin, The Vernon Arms Public House and Hanbury CofE First School, among other places. For rail, the closest station is Bromsgrove station, about 3.7 miles north. A little further out are Avoncroft Museum of Historic Buildings (3.3 miles north) and Dolan Park Hospital (5.2 miles north-east). Not far away are Christopher Cadbury Wetland Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
