Brighton and Hove · England
Bath re-enamelling & resurfacing in Hangleton, Brighton and Hove
Bath re-enamelling for Hangleton, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- An old resurfacing that’s failing
- Brown or grey marks that don’t clean off
Bath re-enamelling in Hangleton without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. Whether it’s lots of chips and rust spots and brown or grey marks that don’t clean off, we can generally put it right, whatever the material.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Hangleton (BN3, BN41)
- Area hub
- Brighton and Hove
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What we’re called out for in Hangleton
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Keep an eye out for any of the following:
- A coating lifting around the plughole
- A coloured bath you want in white
- Staining under the taps and around the waste
- Thin, worn enamel in places
Questions to ask before you book
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- When it can be used again
- How changes to the job are handled
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- How much damage there is
- The type of damage
- How hard the colour is to match
- Previous DIY repairs that have to come out
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Natural light rather than flash
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Repair or replace in Hangleton?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
- We leave the room as we found it
- Straight answers about what a repair can do
Take a look at our pricing or bath cost comparison.
Your questions about bath re-enamelling in Hangleton
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What areas do you cover?
All of Brighton and Hove, and the rest of the UK. There’s no extra charge for travel.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Places near Hangleton
Other services in Hangleton
Hangleton and nearby
Hangleton is about 1 mile north-west of Brighton and Hove, in Brighton and Hove. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Hangleton is one of 30 places in Brighton and Hove we cover. We work right across the region, from Hangleton to London (about 45 miles away).
We cover every part of the BN3 and BN41 postcode area. You will find streets such as Meads Avenue, Warenne Road and Burwash Road, all of which we cover. Hangleton is on the A2038, which makes it straightforward to reach. Neighbouring places we cover include Portslade (1 mile south-west), Southwick (2 miles south-west), Kingston by Sea (2 miles west), Fulking (3 miles north) and Shoreham-by-Sea (3 miles west). Further out, we also cover Brighton (3 miles east), Carlton Hill (3 miles south-east), Hanover (3 miles south-east), West Hill (3 miles south-east), Brunswick (3 miles south-east) and Seven Dials (3 miles south-east).
Local landmarks in Hangleton
We visit homes around Blatchington Mill School and Sixth Form College, St Helen's Church and Hangleton Primary School. Other local landmarks include Benfield Hill (0.6 miles north-west) and The Downsman pub (within half a mile north-east). The nearest railway station is Portslade station, roughly 1 mile south of the centre. A little further out are Clayton Castle (4.7 miles north-east) and British Engineerium (1.1 miles east). The countryside around Hangleton includes Ladies Mile and Thundersbarrow Hill.
For landlords and businesses
Landlords, letting agents and housing providers in Hangleton use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
For anyone letting property in or around Hangleton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Tell us about parking, stairs or access
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
How to get a price
Upload pictures of the damage and a wider shot of the whole item, and tell us you’re in Hangleton, and we will come back with a fixed quote.
Advice
When a repair isn’t the answer
A repair is not always the answer, and we will tell you before we start. Repairs will not solve:
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
- Store bottles off the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
