Northamptonshire · England
Bath Re-enamelling for Hanslope homes
Full bath re-enamelling and resurfacing at your home in Hanslope, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
About our bath re-enamelling in Hanslope
We do not move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. Common call-outs are for worn patches where water runs and sits and an old resurfacing that’s failing, on pressed steel baths, cast iron baths and basins & shower trays.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Hanslope (MK19)
- County
- Northamptonshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
The process
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
Ask for a price
For a price in Hanslope, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
When to call us in Hanslope
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
It’s worth getting a quote if you see:
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
What to look for in a quote
- How the room is protected while they work
- Who will actually do the work
- What preparation is included
- How to look after the finish
Common questions in Hanslope
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What happens after I send pictures?
You will get a fixed quote back, plus dates. There’s no obligation to book.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Do you cover the entire of Northamptonshire?
We cover the whole UK, including Hanslope and the rest of Northamptonshire. Send your postcode with your pictures and we’ll offer you dates.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Looking after it afterwards
To keep it looking its best for years:
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Use washing-up liquid and a soft cloth
- Don’t use the bath until it has fully cured
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
Nearby places to Hanslope
Other services in Hanslope
What a repair cannot fix
A repair is not right for every job, including:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Hanslope
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
What affects the price in Hanslope
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Access to the area
- Any earlier repairs that need removing first
- How much damage there is
- The colour and finish to match
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
How to get a fixed price
You can take the pictures on your phone. Ensure they show:
- One sharp close-up of the damage
- A picture taken from further back
- A coin or ruler next to the damage for scale
- The material, if you know it
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Our work in Hanslope
Hanslope is about 5 miles north-west of Newport Pagnell, in Northamptonshire. Clients in Hanslope get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Our repair technicians cover 364 places in Northamptonshire. Our jobs stretch from Hanslope to Birmingham (51 miles away).
We work across MK19. Local streets include High Street, Market Square and Western Drive, all of which we cover. Other places close to Hanslope include Long Street (1 mile north-west), Hartwell (2 miles north), Grafton Regis (3 miles west), Ashton (3 miles north-west) and Roade (4 miles north-west). Further out, we also cover Northampton (10 miles north), Wellingborough (14 miles north-east), Brackley (15 miles west), Towcester (7 miles west), Wolverton (4 miles south) and Stony Stratford (4 miles south).
Landmarks near Hanslope
In Hanslope, that means homes near Watts Arms Public House And Watts To Rear, Hanslope Primary School and Church of St James the Great and the streets around them. The nearest railway station is Wolverton station, roughly 3.6 miles south. Nearby you’ll also find Bradwell Motte (5 miles south). Green spaces nearby include Mill Crook.
About our accreditations · Every repair comes with a one-year guarantee.
