Somerset · England
Bath Re-enamelling for Hardington Moor homes
Our technicians come to Hardington Moor for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A period or roll-top bath worth keeping
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Bath re-enamelling at your home in Hardington Moor
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair Victorian roll-tops, pressed steel baths and basins & shower trays, and people most often call us about a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Hardington Moor (BA22)
- Area hub
- Somerset
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your pictures. What matters most is:
- Doing more than one item at once
- The material
- What kind of damage it is
- Where the damage is and how we get to it
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Natural light rather than flash
- The material, if you know it
To get a price, send a couple of pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
If you manage property in Hardington Moor, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Towns and villages near Hardington Moor
More services for Hardington Moor
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why Hardington Moor customers choose us
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
- No extra charge for your area
Take a look at our full price list and bath cost comparison.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Repair dripping taps early
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
FAQs for Hardington Moor
How much does bath re-enamelling cost in Hardington Moor?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. A badly pitted bath can need a second day.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Do you come to Hardington Moor?
Yes, we do. Technicians travel to Hardington Moor from across the region, and the price is the same as everywhere else.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About Hardington Moor
Hardington Moor is about 3 miles south-west of Yeovil, in Somerset. We visit clients in Hardington Moor, so nothing has to leave your home. Our repair technicians cover 640 places in Somerset, from the larger towns to small villages.
Postcode districts we cover here: BA22. Jobs here include addresses on Pig Hill, Moor Lane and Nursery Gardens and the roads around them. We also travel to Lyatts (1 mile south-east), Hardington Mandeville (1 mile south-west), West Coker (1 mile north), Holywell (1 mile north-east) and Burton (1 mile north-east). Larger places within reach include Yeovil (3 miles north-east), Chard (12 miles west), Street (15 miles north), Crewkerne (5 miles west), Somerton (10 miles north) and Ilminster (10 miles west).
Local landmarks in Hardington Moor
In Hardington Moor, that means homes near West Coker CofE VC Primary School, Royal Oak Inn and Church of Saint Mary. For rail, the closest station is Yeovil Junction station, about 3.4 miles east of the centre. Further afield, we also cover the area around Dawe's Twineworks (0.9 miles north-west) and Yeovil Hospital (3.5 miles north-east). Not far away are Abbot's Hill.
About our accreditations · Every repair comes with a one-year guarantee.
