Bedford Borough · England
Bath Re-enamelling for Harpur homes
Full bath re-enamelling and resurfacing for homes and businesses in Harpur and across Bedford Borough. Free, fixed quotes from your photos.
- Resurfacing from £350
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Common problems we fix in Harpur
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Most people get in touch after spotting something like this:
- Stains that won’t shift
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- An outdated colour you’d like to change
What your quote should include
- How changes to the job are handled
- How the room is protected while they work
- What preparation is included
- How to look after the finish
How we handle bath re-enamelling in Harpur
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, we can generally put it right, whatever the material.
Big or small, you get the same one-year guarantee in Harpur and across Bedford Borough.
- Location
- Harpur (MK40, MK41)
- Area hub
- Bedford Borough
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why Harpur customers choose us
- We will tell you if it’s not worth repairing
- Technicians who travel to you, UK-wide
- One visit for most repairs
- Fixed prices from your pictures
See our prices page and guide to resurfacing and replacement costs.
Questions from Harpur
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- How easy the damage is to reach
- Doing more than one item at once
- Any earlier repairs that need removing first
- The material and finish
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Two or three clear pictures are typically enough. It helps if you send:
- A wider photo showing the entire bath
- Natural light rather than flash
- A close-up of the damage, in focus
- Where you are, by postcode
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we’re done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.
Related advice
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs immediately
- A dripping tap should be fixed promptly
- Store bottles off the bath
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What a repair cannot fix
We would rather lose a job than do one that won’t last, so these are the limits:
- A metal bath with a through crack
- A bath that is rusted through
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Places near Harpur
More services for Harpur
Harpur and nearby
Harpur is about 1 mile north-west of Bedford, in Bedford Borough. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Harpur is one of 94 places in Bedford Borough we cover. Our jobs stretch from Harpur to London (48 miles away).
Here we cover the MK40 and MK41 postcode area. Local streets include Cowper Road, Sidney Road and Milton Road. Neighbouring places we cover include Bedford (1 mile south-east), Castle (1 mile south-east), Queens Park (1 mile south-west), Clapham Green (1 mile north) and Cauldwell (2 miles south). We also work in nearby towns such as Wixams (4 miles south), Wootton (4 miles south-west), Shortstown (3 miles south-east), Marston Moretaine (7 miles south-west), Cranfield (8 miles south-west) and Stewartby (5 miles south).
Near you in Harpur
Around Harpur, we work in homes near Slug & Lettuce pub, Church of St Martin and Bedford Park, among other places. Also close by are Polam School (within half a mile south), Edith Cavell Primary School (less than half a mile west) and Bedford High School for Girls (0.6 miles south). The closest station to Harpur is Bedford station, about 0.8 miles south. Other landmarks nearby include John Bunyan Museum and Library (0.9 miles south-east) and Risinghoe Castle (2.9 miles east). Open spaces near Harpur include Browns Wood Local Nature Reserve.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Harpur use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
