Lincolnshire · England
Bath Re-enamelling for Hartsholme homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Hartsholme. Free, fixed quotes from your photos.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that’s seen better days
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Bath re-enamelling at your home in Hartsholme
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for brown or grey marks that don’t clean off and a coloured bath you want in white, across basins & shower trays, acrylic baths and cast iron baths.
All our work comes with our one-year guarantee.
- Where
- Hartsholme (LN6)
- Region
- Lincolnshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Hartsholme
More services for Hartsholme
Where we work around Hartsholme
Hartsholme is about 2 miles north of North Hykeham, in Lincolnshire. We travel to clients in Hartsholme, so you do not need to take anything anywhere. Hartsholme is one of 732 towns and villages in Lincolnshire we cover. You can also see our page for Leeds, about 57 miles away.
Every address in LN6 is covered. Jobs here include addresses on Tudor Road, Blyton Road and Fulmar Road and the roads around them. We also cover the places around Hartsholme: Swanpool (1 mile east), Boultham Moor (1 mile east), Boultham (1 mile east), Bracebridge (2 miles south-east) and New Boultham (2 miles north-east). Within a short drive, we also cover Gainsborough (15 miles north-west), Ermine (3 miles north-east), Waddington (3 miles south-east), Bracebridge Heath (3 miles south-east), Welton (8 miles north-east) and Branston (5 miles east).
Near you in Hartsholme
Typical jobs here are in homes near St Luke & St Martin Church, Priory City of Lincoln Academy and The Priory Witham Academy. Other local landmarks include Boultham Park (1.4 miles east) and Hartsholme Academy (0.5 miles east). The nearest railway station is Hykeham station, about 1.2 miles south of the centre. A little further out are St John's Hospital (2.6 miles east) and Thorngate (2.5 miles north-east). Not far away are Tunman Wood and Brayford Pool.
Hartsholme questions
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, with the bath back in use the following day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Colours mixed by hand to suit your surface
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- Fixed prices from your pictures
Read our pricing and guide to resurfacing and replacement costs.
What we cannot put right
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- Access to the area
- What the surface is made of
- Doing more than one item at once
- How much damage there is
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
You can take the photos on your phone. Just make sure we can see:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Looking after it afterwards
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Keep a parking space free if you can
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Related advice
Common problems we fix in Hartsholme
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is generally as strong as ever.
The things customers normally mention when they call include:
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
- A coating lifting around the plughole
Before booking anyone
- Who turns up on the day
- How your room will be protected
- How the colour is matched
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
