Lincolnshire · England
Bath re-enamelling & resurfacing in Branston, Lincolnshire
Full bath re-enamelling and resurfacing for homes and businesses in Branston and across Lincolnshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
About our bath re-enamelling in Branston
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Nothing is disconnected or removed. If you are dealing with an old resurfacing that’s failing and a period or roll-top bath worth keeping, we can normally put it right.
Every repair comes with our one-year guarantee.
- Area
- Branston (LN4)
- Region
- Lincolnshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Branston
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted:
- A roll-top that is seen better days
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
What your quote should include
- If travel is included in the price
- How your room will be protected
- How changes to the job are handled
- Aftercare advice
Also near Branston
Other services in Branston
Covering Branston
Branston is about 4 miles south-east of Lincoln, in Lincolnshire. Customers in Branston get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover all 732 towns and villages in Lincolnshire, from the larger towns to small villages. We work right across the region, from Branston to Leeds (about 61 miles away).
Postcode districts we cover here: LN4. You will find streets such as Station Road, High Street and Church Road, all of which we cover. Other places close to Branston include Potterhanworth (2 miles south-east), Nocton (3 miles south-east), Dunston (4 miles south-east), Metheringham (5 miles south-east) and Blankney (6 miles south-east). Further out, we also cover Lincoln (4 miles north-west), Sleaford (14 miles south), North Hykeham (5 miles west), Horncastle (15 miles east), Birchwood (5 miles west) and Woodhall Spa (11 miles east).
Landmarks near Branston
Around Branston, we work in homes near Branston Community Academy, Branston Junior Academy and Church of All Saints and the streets around them. The nearest railway station is Lincoln Central station, about 3.5 miles north-west. Nearby you will also find Thorngate (3.5 miles north-west) and City And County Museum (3.6 miles north-west). For a walk, there’s Brayford Pool.
Prices and what affects them
Prices start from £350. We price every job individually. What matters most is:
- Unusual colours or finishes
- How many areas need work
- What kind of damage it is
- How many items we do on one visit
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Any earlier repairs or coatings
- The material, if you know it
- One picture of the entire bath
- A clear, close picture of the problem area
To get a price, send a couple of photos using our quote form or ring us. We’ll say straight away whether it can be repaired.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Branston
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
FAQs for Branston
Can you quote from photos?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Aftercare tips
How the surface is treated afterwards matters:
- Have chips seen to early
- Avoid suction-cup mats
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
Preparing for the visit
- Open a window if you can
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
Ask for a price
If you are in Branston and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Landlords, agents and businesses in Branston
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
