Surrey · England

Bath Re-enamelling for Hascombe homes

Damaged bath in Hascombe? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Hascombe

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Bath re-enamelling in Hascombe, done in place

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are enamel that’s lost its shine and feels rough and a roll-top that’s seen better days.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Area
Hascombe (GU8)
Area hub
Surrey
Warranty
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.

When a repair isn’t the answer

To be straight with you, there are a few things a repair won’t fix:

  • Anything hidden under an old coating, until we remove it
  • Plumbing leaks, which need a plumber
  • A metal bath with a through crack

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths

How the visit works

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and we leave the room as we found it.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Tell us about parking, stairs or access
  • Ensure the room can be ventilated
  • Let us know if it has been repaired before

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a fixed quote

Advice

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Why repair rather than replace?

Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Colour mixed on the day to match
  • One price list for the entire UK
  • Work done at your home or business
  • Free fixed quotes from pictures

See our prices page or resurfacing vs replacement cost guide.

Covering Hascombe

Hascombe is about 7 miles south of Guildford, in Surrey. Whether you’re in the middle of Hascombe or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Hascombe is one of 395 towns and villages in Surrey where we work. You can also see our page for London, about 32 miles away.

Our technicians cover all of GU8. Local streets include The Street and Church Road, all of which we cover. Close by, we cover Loxhill (1 mile south), Thorncombe Street (1 mile north), Grafham (2 miles north-east), Munstead Heath (2 miles north-west) and Dunsfold (2 miles south). We also work in nearby towns such as Guildford (7 miles north), Woking (12 miles north), Camberley (14 miles north-west), Farnham (11 miles north-west), Dorking (12 miles north-east) and Frimley (13 miles north-west).

Local landmarks in Hascombe

Typical jobs here are in homes near Church of St Peter and The White Horse Public House, among other places. The nearest railway station is Milford (Surrey) station, about 3 miles west. Further afield, we also cover the area around Milford Hospital (2.6 miles north-west) and Godalming Museum (3.1 miles north-west). Green spaces nearby include Lower Lake and Hydon's Ball.

Map of Hascombe © OpenStreetMap contributors

Prices and what affects them

Prices start from £350. There’s no charge for travel to Hascombe. The price comes down to:

  • Access to the area
  • The material and finish
  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Send photos for a quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Any earlier repairs or coatings
  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection

If you’re in Hascombe and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Questions from Hascombe

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

How long is the bath unusable?

One day for most baths and can be used the day after. We give you timings with the quote.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Surrey.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Will the new finish last?

Care for it and it lasts. Avoid abrasive cleaners and suction mats.

Is there a smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

What happens after I send photos?

We review the pictures and send a fixed quote and the next dates we have.

When to call us in Hascombe

Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.

These are the problems we’re asked about most:

  • A coloured bath you want in white
  • Several chips and rust patches
  • A period or roll-top bath worth keeping
  • Brown or grey marks that don’t clean off

Comparing quotes

  • What the guarantee covers, and for how long
  • Who will actually do the work
  • What aftercare is recommended
  • How long it needs to cure

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.