County Durham · England
Bath Re-enamelling in Haswell Plough
Full bath re-enamelling and resurfacing at your home in Haswell Plough, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- An original cast iron bath that needs restoring
Bath re-enamelling in Haswell Plough, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with staining under the taps and around the waste and a period or roll-top bath worth keeping, we can generally put it right, on pressed steel baths, cast iron baths and basins & shower trays alike.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Haswell Plough (DH6)
- Region
- County Durham
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes most of the day. We leave the room clean and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
- Let us know which floor the room is on
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Related advice
Towns and villages near Haswell Plough
Also in Haswell Plough
How we price bath re-enamelling
Prices start from £350. We price every job individually. What matters most is:
- The size and number of damaged areas
- The type of damage
- Where the damage is and how we get to it
- The material and finish
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A photo taken from further back
- A close-up of the damage, in focus
- Something in shot to show the size
- The material, if you know it
If you are in Haswell Plough and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What a repair can’t fix
We won’t take on work that will not last, so these are the limits:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Looking after it afterwards
How the surface is treated afterwards matters:
- Do not leave a chip unrepaired
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Covering Haswell Plough
Haswell Plough is about 3 miles west of Peterlee, in County Durham. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Haswell Plough is one of 329 towns and villages in County Durham where we work. You can also see our page for Newcastle upon Tyne, about 17 miles away.
Our visits in DH6 are booked in the same way as anywhere else. Jobs here include addresses on Front Street, Durham Lane and Gloucester Terrace and the roads around them. You will find Haswell Plough on the B1283, so it’s easy for us to reach. If you are just outside Haswell Plough, we cover Ludworth (1 mile south-west), Haswell (1 mile north-east), Haswell Moor (1 mile east), Fleming Field (1 mile south-east) and Thornley (2 miles south). Larger places within reach include Durham (6 miles west), Newton Aycliffe (12 miles south-west), Bishop Auckland (13 miles south-west), Spennymoor (9 miles south-west), Seaham (5 miles north-east) and Chester-le-Street (8 miles north-west).
Local landmarks in Haswell Plough
We visit homes around Ludworth Primary School and Parish Church of St. Paul. The closest station to Haswell Plough is Horden station, roughly 4.7 miles east. Nearby you will also find County Durham (1.9 miles south-west) and Dalton Park (3.5 miles north-east). The countryside around Haswell Plough includes Beacon Hill.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
When to call us in Haswell Plough
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
People usually call us when they notice one of these:
- Chips and rust in more than one place
- A coloured bath you want in white
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
What to look for in a quote
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- How long it needs to cure
- Who turns up on the day
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Haswell Plough
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
Read our prices page or guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Haswell Plough questions
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the whole item with your DH6 postcode.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Is repairing better than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Do you cover the whole of County Durham?
All of County Durham, and the rest of the UK. There is no extra charge for travel.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
About our accreditations · Every repair comes with a one-year guarantee.
