Essex · England

Bath Re-enamelling for Henham homes

Bath re-enamelling across Henham and nearby, normally in one visit.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Henham homes

Where we work around Henham

Henham is about 6 miles north-east of Bishop's Stortford, in Essex. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Henham is one of 644 places in Essex where we work. You can also see our page for London, about 33 miles away.

Jobs in CM22 work the same way as everywhere else we cover. From High Street, The Row and Crow Street or anywhere nearby, we can come to you. Other places close to Henham include Elsenham (2 miles south-west), Ugley Green (2 miles south-west), Fuller's End (2 miles south-west), Ugley (2 miles west) and Broxted (2 miles east). Larger places within reach include Braintree (14 miles east), Harlow (13 miles south-west), Saffron Walden (6 miles north), Great Dunmow (6 miles south-east), Stansted Mountfitchet (3 miles south-west) and Great Notley (13 miles east).

Local landmarks in Henham

Around Henham, we work in homes near The Cock Inn, Church of St Mary the Virgin and Henham and Ugley Primary and Nursery School and the streets around them. The nearest railway station is Elsenham station, about 1.2 miles south-west of the centre. Other landmarks nearby include Little Easton Moat (4.7 miles south-east) and Herts and Essex Hospital (5.6 miles south-west). Green spaces nearby include Aubrey Buxton Nature Reserve.

Map of Henham © OpenStreetMap contributors

Bath re-enamelling in Henham, done in place

We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Whether it’s an original cast iron bath that needs restoring and lots of chips and rust spots, we can usually put it right, on pressed steel baths, basins & shower trays and cast iron baths alike.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Where
Henham (CM22)
County
Essex
Cover
A year, on every repair
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • A dripping tap should be fixed promptly
  • Get any chip repaired quickly
  • Wipe the bath dry after use in hard water areas
  • Avoid suction-cup mats

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

What affects the price in Henham

Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • Doing more than one item at once
  • The material and finish
  • How much damage there is

What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.

How to get a fixed quote

When you take your photos, a few simple things make all the difference:

  • Something in shot to show the size
  • What it’s made of, if you know
  • Natural light rather than flash
  • Your postcode, so we can check dates

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Common questions in Henham

Do you come to Henham?

Yes. We work across the UK and travel to Henham. Send us photos for a fixed quote, or call 0345 017 0787.

Is there a smell?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

Can you re-enamel a roll-top bath?

Yes. Inside and out.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Will the new finish last?

Care for it and it lasts. Avoid abrasive cleaners and suction mats.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Can you make a coloured bath white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

How long will the bath be out of use?

Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.

What a repair cannot fix

A few problems are outside what a surface repair can do:

  • Holes rusted through the metal
  • A poorly supported acrylic bath, until it’s firmed up
  • A metal bath with a through crack

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.

Cast iron

Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Landlord and trade work in Henham

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Repair or replace: which is better?

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You’ll see the full price before you book.

Why book with us

  • CHAS and Constructionline accredited
  • We will tell you if it’s not worth repairing
  • Colour-matched on site
  • Most jobs done in one visit

Read our full price list and resurfacing vs replacement cost guide.

How it works

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area

Ask for a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Send photos for a quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.