Suffolk · England
Bath re-enamelling & resurfacing in Henstead, Suffolk
Bath re-enamelling in Henstead without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
Bath re-enamelling at your home in Henstead
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We are often asked to fix a roll-top that’s seen better days and thin, worn enamel in places, in acrylic baths, cast iron baths and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Henstead (NR34)
- County
- Suffolk
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Ask for a price
Upload pictures of the damage and a wider shot of the entire item, with your NR34 postcode, and we will come back with a fixed quote.
Advice
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- What kind of damage it is
- How much damage there is
- How easy the damage is to reach
- The material
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- Any details about the material
- Whether it’s been repaired or coated before
The quickest way to a price is to send two or three pictures using our quote form or call us. We will say right away whether it can be repaired.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Repair dripping taps early
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Nearby places to Henstead
What else we do in Henstead
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Henstead clients choose us
- Typically one visit, start to finish
- One price list for the whole UK
- Everything repaired in place
- We will tell you if it’s not worth repairing
Take a look at our prices page or guide to resurfacing and replacement costs.
Common questions in Henstead
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Covering Henstead
Henstead is about 5 miles south-west of Lowestoft, in Suffolk. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Henstead is one of 731 places in Suffolk we cover.
Our technicians cover all of the NR34 postcode area. Streets in the area include Church Road and Benacre Road, and we cover them all. Nearby, we also work in Toad Row (1 mile east), Rushmere (1 mile north), Black Street (1 mile east), Mutford (1 mile north) and Hulver Street (2 miles north-west). We also work in nearby towns such as Lowestoft (5 miles north-east), Beccles (5 miles north-west), Bungay (10 miles west), Halesworth (8 miles south-west), Leiston (15 miles south) and Carlton Colville (3 miles north-east).
Landmarks near Henstead
Around Henstead, we work in homes near Church of St Mary, among other places. For rail, the closest station is Oulton Broad South station, about 4.2 miles north-east. Well-known places in the area include William Clowes Printing Museum (2.7 miles west) and Lothingland Rural District (2.6 miles north-east). Not far away are North Cove Nature Reserve.
When to call us in Henstead
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Send us a picture if you notice any of these:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
- An outdated colour you’d like to change
What to look for in a quote
- How long the guarantee is and what it covers
- How the room is protected while they work
- Who turns up on the day
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
