Suffolk · England
Bath Re-enamelling for Black Street homes
Full bath re-enamelling and resurfacing at your home in Black Street, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- Several chips and rust patches
Bath re-enamelling at your home in Black Street
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with stains that won’t shift and thin, worn enamel in places, we can help.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Black Street (NR33)
- County
- Suffolk
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The material
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- How many items we do on one visit
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- The material, if you know it
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing usually wins. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- A fixed quote before you book
- Nothing taken out or refitted
- Colour-matched on site
- Rooms protected and left tidy
Take a look at our full price list and resurfacing vs replacement cost guide.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Make sure the room can be ventilated
- Clear the area around the damage
- Keep a parking space free if you can
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Common problems we fix in Black Street
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Look out for any of the following:
- Staining under the taps and around the waste
- A coating lifting around the plughole
- A roll-top that’s seen better days
- Thin, worn enamel in places
Before booking anyone
- How to look after the finish
- If travel is included in the price
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
Looking after it afterwards
To keep it looking its best for years:
- Fix dripping taps quickly
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Honest limits
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we will say what we think.
Materials we work on in Black Street
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Also in Black Street
Black Street: your questions answered
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you come to Black Street?
We do. We send a technician to Black Street for every job, with no extra charge for travel.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How do I book?
Send photos through the quote form or call 0345 017 0787.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Our work in Black Street
Black Street is about 4 miles south of Lowestoft, in Suffolk. From the centre of Black Street to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in 731 places across Suffolk.
Jobs in NR33 work the same way as everywhere else we cover. Whether you live on Sandy Lane, Latymere Close and Dam Lane or anywhere nearby, we can come to you. We also cover the places around Black Street: Toad Row (1 mile south-west), Gisleham (1 mile north), Rushmere (1 mile west), Henstead (1 mile west) and Mutford (2 miles north-west). Further out, we also cover Lowestoft (4 miles north), Beccles (6 miles west), Bungay (11 miles west), Halesworth (10 miles south-west), Kirkley (3 miles north-east) and Normanston (4 miles north).
Around Black Street
Our clients here include homes close to Kessingland Church of England Primary Academy, Pakefield High School and Livingstone's pub and the streets around them. The closest station to Black Street is Oulton Broad South station, about 3.3 miles north of the centre. A little further out are Lowestoft Hospital (4.7 miles north-east) and Lothingland Rural District (1.4 miles north-east). Open spaces near Black Street include Carlton and Oulton Marshes and Lake Lothing.
About our accreditations · Every repair comes with a one-year guarantee.
