County Durham · England
Bath Re-enamelling in High Dyke
We travel to High Dyke for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Lots of chips and rust spots
High Dyke: your questions answered
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
How long will the bath be out of use?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens if you find more damage?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
What happens next?
We come back with a fixed price, typically with dates to choose from. You’re under no obligation.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Bath re-enamelling at your home in High Dyke
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Common call-outs are for several chips and rust patches and a bath in a colour that no longer suits, on pressed steel baths, basins & shower trays and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- High Dyke (DL12)
- County
- County Durham
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in High Dyke
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
You may need us if you’ve spotted:
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
Comparing quotes
- Aftercare advice
- Whether the colour is mixed to match
- How your room will be protected
- What happens if the damage is worse than the pictures show
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Our work in High Dyke
High Dyke is about 14 miles south-west of Crook, in County Durham. From the centre of High Dyke to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. High Dyke is one of 329 places in County Durham we cover. Our nearest city page is Newcastle upon Tyne, about 30 miles away.
Here we cover the DL12 postcode area. Other places close to High Dyke include Middleton-in-Teesdale (1 mile south), Mickleton (2 miles south-east), Newbiggin (2 miles west), Grassholme (3 miles south-west) and Eggleston (4 miles south-east). Within a short drive, we also cover Crook (14 miles north-east), Barnard Castle (9 miles south-east), St Helen Auckland (15 miles east), West Auckland (14 miles east), Wolsingham (10 miles north-east) and Stanhope (8 miles north).
Near you in High Dyke
Around High Dyke, we work in homes near Middleton-in-Teesdale Nursery and Primary School and Church of St Mary, among other places. For a walk, there is Scarney Hill.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in High Dyke
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
Take a look at our prices page and bath cost comparison.
The process
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the day after.
Getting ready for the visit
- Open a window if you can
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Advice
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Landlord and trade work in High Dyke
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Keeping it looking good
Aftercare is simple:
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Don’t use the bath until it has fully cured
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- How much damage there is
- The colour and finish to match
- Previous DIY repairs that have to come out
- What the surface is made of
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- Where you are, by postcode
- Something in shot to show the size
- Any earlier repairs or coatings
For a price in High Dyke, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Places near High Dyke
Other services in High Dyke
About our accreditations · Every repair comes with a one-year guarantee.
