Somerset · England
Bath Re-enamelling for High Ham homes
Local bath re-enamelling for High Ham: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Bath re-enamelling at your home in High Ham
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with an original cast iron bath that needs restoring and an old resurfacing that’s failing, we can normally put it right, on basins & shower trays, Victorian roll-tops and cast iron baths alike.
Every repair comes with a one-year guarantee, wherever you are in Somerset.
- Location
- High Ham (TA10)
- Area hub
- Somerset
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Do you need bath re-enamelling in High Ham?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Clients normally contact us about:
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
Comparing quotes
- How long the guarantee is and what it covers
- Whether they match the colour on site
- If travel is included in the price
- Whether a trained technician does the job
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What we can’t put right
A repair isn’t right for every job, including:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
High Ham questions
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will there be a smell?
Expect a mild smell while we are working.
Which areas do you work in?
Across the UK, and that includes High Ham. Our prices are the same everywhere.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Also near High Ham
More services for High Ham
What affects the price in High Ham
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- Whether we combine several jobs
- The type of damage
- The material and finish
- Previous DIY repairs that have to come out
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Do not let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repair or replace in High Ham?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- We will tell you if it’s not worth repairing
Take a look at our pricing and bath cost comparison.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Get a quote
Upload a photo of the damage and a wider shot of the entire item, and tell us you are in High Ham, and we will reply with a fixed price.
Read more
High Ham and the surrounding area
High Ham is about 9 miles south-east of Bridgwater, in Somerset. From the centre of High Ham to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. High Ham is one of 640 towns and villages in Somerset where we work.
All of TA10 is within our area, from the main roads to the quietest streets. Whether you live on Breach Furlong Lane, Stout Road and Windmill Road or a nearby road, a technician can come to you. Other places close to High Ham include Low Ham (1 mile south-east), Beer (1 mile west), Wearne (2 miles south), Combe (2 miles south) and Aller (2 miles south-west). Larger places within reach include Taunton (13 miles west), Bridgwater (9 miles north-west), Yeovil (12 miles south-east), Chard (15 miles south-west), Burnham-on-Sea (14 miles north-west) and Wells (12 miles north-east).
What’s near High Ham
Locally, our jobs take us to homes close to The Kings Head Inn, High Ham Church of England Primary School and St Andrew's Church, among other places. The countryside around High Ham includes West Sedgemoor RSPB reserve and Burrow Mump.
About our accreditations · Every repair comes with a one-year guarantee.
