Somerset · England
Bath re-enamelling & resurfacing in Wearne, Somerset
Our repair technicians come to Wearne for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A coloured bath you want in white
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Bath re-enamelling in Wearne without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We’re frequently asked to fix chips and rust in more than one place and an outdated colour you’d like to change, on cast iron baths, acrylic baths and Victorian roll-tops.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Wearne (TA10)
- Region
- Somerset
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Wearne
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
What happens next?
We review the pictures and send a fixed quote with dates.
Can you repair something that is been repaired before?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you quote from photos?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Don’t let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- Have chips seen to early
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Where we work around Wearne
Wearne is about 6 miles south-west of Street, in Somerset. Whether you’re in the middle of Wearne or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 640 places in Somerset.
Every address in TA10 is covered. Other places close to Wearne include Combe (1 mile west), Pict's Hill (1 mile south-east), Langport (1 mile south), Wagg (1 mile south-east) and Low Ham (1 mile north). We also work in nearby towns such as Taunton (12 miles west), Bridgwater (10 miles north-west), Yeovil (10 miles south-east), Chard (14 miles south-west), Burnham-on-Sea (15 miles north-west) and Wells (13 miles north-east).
Around Wearne
In Wearne, that means homes near The Black Swan Inn, Church without dedication and Huish Episcopi Primary School and the streets around them. Not far away are Burrow Mump and West Sedgemoor RSPB reserve.
Common problems we fix in Wearne
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Most people get in touch when they notice something like this:
- Staining under the taps and around the waste
- Several chips and rust patches
- A dull, rough surface that will not come clean
- A coloured bath you want in white
What your quote should include
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- Whether a trained technician does the job
Other services in Wearne
When a repair is not the answer
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Work for landlords and builders
Landlords, letting agents and housing providers in Wearne use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Wearne. The price reflects:
- The material and finish
- Unusual colours or finishes
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
We price nearly every job from photos. This is what we need:
- Natural light rather than flash
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
Most clients in Wearne get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take the best part of a day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
