West Sussex · England
Bath Re-enamelling in High Salvington
Problem with your bath in High Salvington? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- Chips and rust in more than one place
Bath re-enamelling in High Salvington without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for an old resurfacing that’s failing and chips and rust in more than one place, on acrylic baths, Victorian roll-tops and pressed steel baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- High Salvington (BN13, BN14)
- Region
- West Sussex
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
So the finish stays in good condition:
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we can’t put right
Before booking, it’s worth knowing the limits:
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Your questions about bath re-enamelling in High Salvington
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How long does re-enamelling take?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How the visit works
We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we’ll tell you if anything changes.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Repairing versus replacing in High Salvington
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why High Salvington clients choose us
- No extra charge for your area
- A year’s guarantee on all work
- Everything repaired in place
- Work done at your home or business
Read our prices page or resurfacing vs replacement cost guide.
Landlords, agents and businesses in High Salvington
We work for landlords, letting agents and housing providers in High Salvington as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Common problems we fix in High Salvington
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
The things customers typically mention when they call include:
- Lots of chips and rust spots
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- An old resurfacing that’s failing
Before booking anyone
- What preparation is included
- How changes to the job are handled
- Whether there are any call-out or travel charges
- Aftercare advice
High Salvington and nearby
High Salvington is about 2 miles north of Worthing, in West Sussex. From the centre of High Salvington to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 371 towns and villages across West Sussex. Our jobs stretch from High Salvington to London (about 47 miles away).
Jobs in BN13 and BN14 work the same way as everywhere else we cover. Streets in the area include Mill Lane, Furze Road and Gorse Lane, all of which we cover. Other places close to High Salvington include Cote (1 mile south-west), Durrington (1 mile south), Findon (1 mile north), Clapham (2 miles west) and Patching (2 miles west). Further out, we also cover Horsham (15 miles north), Bognor Regis (13 miles west), Burgess Hill (14 miles north-east), Littlehampton (6 miles south-west), Shoreham-by-Sea (6 miles east) and Lancing (4 miles east).
Around High Salvington
Typical jobs here are in homes near Clapham Wood, St Peter and Durrington High School. High Salvington’s nearest station is Durrington-On-Sea station, about 2.2 miles south. Other landmarks nearby include Museum of Sussex Folklore (1.7 miles south) and Old Castle (1.7 miles south). Not far away are Highdown Hill and Widewater Lagoon.
Places near High Salvington
Other services in High Salvington
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including High Salvington. The price reflects:
- The material and finish
- Whether we combine several jobs
- What kind of damage it is
- Whether old repairs or coatings need taking off
We charge the same wherever you are, with no extra for High Salvington. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- One picture of the entire bath
- Your postcode, so we can check dates
- Natural light rather than flash
To get a price, send a couple of pictures using our quote form or call us. We’ll say immediately whether it can be repaired.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
