Swindon · England
Bath Re-enamelling for Highworth homes
Damaged bath in Highworth? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Bath re-enamelling in Highworth without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a coloured bath you want in white and a dull, rough surface that won’t come clean.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Highworth (SN6)
- County
- Swindon
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Highworth
Other services in Highworth
Common problems we fix in Highworth
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- A roll-top that is seen better days
- A dull, rough surface that will not come clean
- Several chips and rust patches
- A bath in a colour that no longer suits
Before booking anyone
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the photos show
- Whether they match the colour on site
Highworth and the surrounding area
Highworth is about 4 miles north-east of Stratton St Margaret, in Swindon. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Highworth is one of 68 towns and villages in Swindon where we work. Our nearest city page is Birmingham, about 58 miles away.
Here we cover the SN6 postcode area. From Station Road, High Street and Westrop or a nearby road, we can come to you. With the A361 and B4000 close by, Highworth is simple for us to get to. If you are just outside Highworth, we cover Sevenhampton (1 mile south), Hannington (2 miles west), Stanton Fitzwarren (2 miles south-west), Upper Inglesham (2 miles north) and Hyde (3 miles south-west). We also work in nearby towns such as Swindon (6 miles south-west), Stratton St Margaret (4 miles south-west), Royal Wootton Bassett (10 miles south-west), Haydon Wick (5 miles south-west), Priory Vale (5 miles south-west) and Freshbrook (8 miles south-west).
Around Highworth
Our customers here include homes close to Highworth Warneford School, Church of St Michael and 23 pub, among other places. Well-known places in the area include Faringdon Day Hospital (5.5 miles east). For a walk, there is Badbury Hill.
How to look after the repair
It’s all simple stuff:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Open a window if you can
- Let us know about parking or access
- Tell us if there are stairs or a lift
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Landlord and trade work in Highworth
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Your questions about bath re-enamelling in Highworth
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How long does re-enamelling take?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The material and finish
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- How easy the damage is to reach
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
You can usually get a fixed quote without us visiting. To help us price it:
- Any earlier repairs or coatings
- Any details about the material
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
To get a price, send a couple of photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Repairing versus replacing in Highworth
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Highworth clients choose us
- One visit for most repairs
- Everything repaired in place
- No extra charge for your area
- Colour mixed on the day to match
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
