Swindon · England

Bath Re-enamelling in Sevenhampton

Bath re-enamelling across Sevenhampton and nearby, normally in one visit and guaranteed for a year.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • An old resurfacing that is failing
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Sevenhampton?

How we handle bath re-enamelling in Sevenhampton

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on cast iron baths, pressed steel baths and acrylic baths, and common reasons people contact us are stains that won’t shift and an old resurfacing that’s failing.

Whatever the size of the job, you get the same one-year guarantee in Sevenhampton and across Swindon.

Where
Sevenhampton (SN6)
County
Swindon
Warranty
One year on every repair
Price
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.

Housing associations and facilities teams use us for planned and reactive repairs in Swindon and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Stick to gentle, non-abrasive cleaners
  • Leave the bath for the full curing time before using it
  • Wipe the bath dry after use in hard water areas
  • Have chips seen to early

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

What we do, step by step

There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to the best part of a day.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Mention if the room is upstairs or in a flat
  • Mention any parking restrictions or tricky access

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

Send pictures for a quote

Related advice

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

When a repair isn’t the answer

Before booking, it’s worth knowing the limits:

  • Leaking taps or wastes (a plumber’s job)
  • A bath split right through the body
  • Holes rusted through the metal

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths

Prices and what affects them

Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:

  • Previous DIY repairs that have to come out
  • The colour and finish to match
  • Doing more than one item at once
  • Whether it’s a chip, crack, burn or wear

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Send photos for a quote

Photographing the damage takes a minute. Please include:

  • A wider photo showing the entire bath
  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.

About Sevenhampton

Sevenhampton is about 3 miles north-east of Stratton St Margaret, in Swindon. From the centre of Sevenhampton to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Sevenhampton is one of 68 towns and villages in Swindon we cover. You can also see our page for Birmingham, about 60 miles away.

Here we cover the SN6 postcode area. Other places close to Sevenhampton include Highworth (1 mile north), Stanton Fitzwarren (2 miles west), Hannington (3 miles north-west), Hyde (3 miles west) and Broad Blunsdon (3 miles west). Within a short drive, we also cover Swindon (5 miles south-west), Stratton St Margaret (3 miles south-west), Royal Wootton Bassett (9 miles south-west), Haydon Wick (5 miles west), Priory Vale (4 miles west) and Freshbrook (7 miles south-west).

Local landmarks in Sevenhampton

We visit homes around Highworth Warneford School, Southfield Junior School and Church of St James. Sevenhampton’s nearest station is Swindon station, roughly 4.7 miles south-west. Well-known places in the area include Great Western Hospital (4.9 miles south-west). Green spaces nearby include Badbury Hill.

Map of Sevenhampton © OpenStreetMap contributors

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Sevenhampton: your questions answered

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

What happens once I’ve sent pictures?

We check the damage, the material and your postcode, then reply with a quote.

How long is the bath unusable?

Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Do you work in Sevenhampton?

Yes, we do. We send a technician to Sevenhampton for every job, and the price is the same as everywhere else.

Repair or replace: which is better?

A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day. Prices start from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Sevenhampton clients choose us

  • Dust sheets down, tidy finish
  • Free fixed quotes from pictures
  • Work done at your home or business
  • No extra charge for your area

Read our prices page or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.