Kirklees · England
Bath re-enamelling & resurfacing in Hill Top, Kirklees
Damaged bath in Hill Top? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Stains that won’t shift
Bath re-enamelling at your home in Hill Top
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the following day. Our repair technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and people most frequently call us about a dull, rough surface that won’t come clean and worn patches where water runs and sits.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Hill Top (HD7)
- County
- Kirklees
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Hill Top
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with nothing added on the day.
What you get with us
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Most jobs done in one visit
- A fixed quote before you book
See our prices page and resurfacing vs replacement cost guide.
Other services in Hill Top
Signs you need bath re-enamelling in Hill Top
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Signs it’s time to call us include:
- A peeling or bubbling previous coating
- Stains that will not shift
- Several chips and rust patches
- Thin, worn enamel in places
What to look for in a quote
- What the guarantee covers, and for how long
- Who will actually do the work
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
What we can’t put right
It helps to know what we cannot do too:
- Holes rusted through the metal
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
What affects the price in Hill Top
Resurfacing from £350. You will not pay by the hour. The price is based on:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How many items we do on one visit
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
You can normally get a fixed price without us visiting. To make it quick:
- What it’s made of, if you know
- One picture of the whole bath
- Details of any past repairs
- One sharp close-up of the damage
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Hill Top: your questions answered
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Are there extra charges for Hill Top?
Travel is included in the price, with the same prices everywhere we work.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Do you work in Hill Top?
We do. We send a technician to Hill Top for every job, and the price is the same as everywhere else.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
What happens once I’ve sent photos?
We review the photos and send a fixed quote.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Looking after it afterwards
Once the work has cured, treat it gently:
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Don’t let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Covering Hill Top
Hill Top is about 2 miles north-west of Meltham, in Kirklees. Jobs in Hill Top are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in all 189 towns and villages across Kirklees. Our nearest city page is Manchester, about 16 miles away.
All of HD7 is covered, from the main roads to the quietest streets. Local streets include Hollins Lane, Lingards Road and Lane and Dowry Road, all of which we cover. Other places close to Hill Top include Blakestones (1 mile north), Holt Head (1 mile south-east), Upper Holme (1 mile north-west), Slaithwaite (1 mile north-east) and Blackmoorfoot (2 miles east). Larger places within reach include Huddersfield (5 miles north-east), Dewsbury (12 miles north-east), Batley (12 miles north-east), Mirfield (9 miles north-east), Liversedge (10 miles north-east) and Cleckheaton (10 miles north-east).
Local landmarks in Hill Top
Around Hill Top, we work in homes near Nields Junior Infant and Nursery School, Colne Valley High School and The Olive Branch Inn and the streets around them. For rail, the closest station is Slaithwaite station, roughly 0.9 miles north-east. Nearby you’ll also find Holmfirth Postcard Museum (1.4 miles south-west) and St. Luke's Hospital (3.7 miles north-east). Open spaces near Hill Top include Moorside Edge.
About our accreditations · Every repair comes with a one-year guarantee.
