Staffordshire · England
Bath re-enamelling & resurfacing in Hilton, Staffordshire
Our repair technicians come to Hilton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
What a repair can’t fix
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think.
Materials we work on in Hilton
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
How we handle bath re-enamelling in Hilton
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Our technicians work on cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are staining under the taps and around the waste and several chips and rust patches.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Hilton (WS14)
- County
- Staffordshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Hilton
More services for Hilton
Covering Hilton
Hilton is about 2 miles east of Brownhills, in Staffordshire. Whether you are in the middle of Hilton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 512 places across Staffordshire, from the larger towns to small villages. Our jobs stretch from Hilton to Birmingham (about 12 miles away).
Every address in WS14 is covered, from the main roads to the quietest streets. If you are just outside Hilton, we cover Muckley Corner (1 mile north), Lower Stonnall (1 mile south), Chesterfield (1 mile east), Stonnall (1 mile south-west) and Wall (1 mile north-east). Further out, we also cover Stafford (15 miles north-west), Burton upon Trent (15 miles north-east), Tamworth (9 miles east), Cannock (7 miles north-west), Lichfield (3 miles north-east) and Rugeley (8 miles north).
Near you in Hilton
Locally, our jobs take us to homes close to Shire Oak Academy and St Peter's Church of England Primary Academy, among other places. Hilton’s nearest station is Shenstone station, about 1.7 miles south-east. Further afield, we also cover the area around St Matthew's Hospital (2.5 miles north) and Ogley Hay Rural (0.6 miles west). The countryside around Hilton includes Bourne Pool and Minster Pool.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
How to look after the repair
To keep it looking its best:
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Do not let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Hilton. What changes the price is:
- How many areas need work
- The material and finish
- The type of damage
- How easy the damage is to reach
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- A photo taken from further back
- Details of any past repairs
- Your postcode, so we can check dates
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Hilton clients choose us
- Normally one visit, start to finish
- One price list for the whole UK
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
See our prices page and resurfacing vs replacement cost guide.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Hilton: your questions answered
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
How do I get a price for bath re-enamelling in Hilton?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can a failed resurfacing be redone?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a full day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Hilton as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
