Dudley · England
Bath Re-enamelling in Himley
Our technicians come to Himley for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
Can I fix it myself?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
About our bath re-enamelling in Himley
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. Typical jobs include wear marks under the taps and a peeling or bubbling previous coating, across Victorian roll-tops, acrylic baths and basins & shower trays.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Area
- Himley (DY3)
- County
- Dudley
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Himley
Other services in Himley
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Do not use the bath until it has fully cured
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
- Point us to the nearest place to park
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
Advice
Your questions about bath re-enamelling in Himley
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you work in Himley?
Yes, we do. Repair technicians travel to Himley from across the region, and the price is the same as everywhere else.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Honest limits
It helps to know what we cannot do too:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Himley
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- Unusual colours or finishes
- How much damage there is
- The type of damage
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Natural light rather than flash
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Our work in Himley
Himley is about 2 miles north-west of Kingswinford, in Dudley. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Our technicians cover 63 places in Dudley. We work right across the region, from Himley to Birmingham (13 miles away).
We work across DY3. Streets in the area include School Road, Churns Hill Lane and Cherry Lane, and we cover them all. We also cover the places around Himley: Wall Heath (1 mile south), Wombourne (1 mile north-west), Hinksford (1 mile south-west), Bratch (2 miles north-west) and Gospel End (2 miles north-east). Larger places within reach include Dudley (4 miles east), Halesowen (7 miles south-east), Stourbridge (5 miles south), Brierley Hill (4 miles south-east), Milking Bank (3 miles east) and Hasbury (7 miles south-east).
What’s near Himley
In Himley, that means homes near Maidensbridge Primary School, The Dudley Arms and Ounsdale High School. Nearby too are Kingswinford Academy (1.5 miles south) and Church of St Michael (under half a mile east). The closest station to Himley is Coseley station, roughly 4.3 miles north-east. A little further out are Broadfield House Glass Museum (1.9 miles south) and Merry Hill Shopping Centre (3.9 miles south-east). Green spaces nearby include Stourton Pit and Beacon Hill.
What we are called out for in Himley
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
These are the problems we are asked about most:
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- How the colour is matched
- Whether cleaning and preparation are in the price
- What the guarantee covers, and for how long
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the next day. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Himley clients choose us
- No need to remove anything
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- One price list for the entire UK
Read our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
