Devon · England
Bath re-enamelling & resurfacing in Holcombe, Devon
Damaged bath in Holcombe? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Holcombe
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s a peeling or bubbling previous coating and a coloured bath you want in white, we can help, on basins & shower trays, acrylic baths and pressed steel baths alike.
Every job is backed for twelve months in Holcombe and everywhere else. If something goes wrong with the work, we come back.
- Location
- Holcombe (EX7)
- County
- Devon
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What kind of damage it is
- How much damage there is
- The material
- How hard the colour is to match
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Any details about the material
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
To get a price, send two or three photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Also near Holcombe
Also in Holcombe
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Common problems we fix in Holcombe
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
Clients normally contact us about:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- Stains that won’t shift
- A dull, rough surface that will not come clean
What your quote should include
- Aftercare advice
- What the guarantee covers, and for how long
- What protection goes down before work starts
- Whether there are any call-out or travel charges
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly before you book.
Materials we work on in Holcombe
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Landlord and trade work in Holcombe
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Holcombe, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Holcombe questions
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Where we work around Holcombe
Holcombe is about 1 mile north-east of Teignmouth, in Devon. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Holcombe is one of 586 places in Devon we cover.
Here we cover the EX7 postcode area. We regularly work on streets such as Teignmouth Road, Derncleugh Gardens and Fordens Lane. Close by, we cover Dawlish (1 mile north), Teignmouth (1 mile south-west), Coombe (2 miles west), Shaldon (2 miles south-west) and Dawlish Warren (3 miles north). Larger places within reach include Exeter (11 miles north), Exmouth (6 miles north-east), Newton Abbot (6 miles south-west), Sidmouth (14 miles north-east), Kingsteignton (5 miles west) and St Thomas (11 miles north).
Landmarks near Holcombe
Our customers here include homes close to Westcliff Primary Academy, St George and Castle Inn and the streets around them. Holcombe’s nearest station is Dawlish station, roughly 1.2 miles north-east. A little further out are Bishopsteignton Heritage (2.9 miles west). The countryside around Holcombe includes Labrador Bay RSPB Reserve.
Keeping it looking good
Looking after the surface is easy:
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Before we arrive
- Clear the area around the damage
- Point us to the nearest place to park
- Have a window or extractor fan available
Getting a price
Send us photos of the damage and one of the whole item, and tell us you are in Holcombe, and we’ll reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
