Sheffield · England
Bath Re-enamelling for Holdworth homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Holdworth. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An old resurfacing that is failing
- A bath in a colour that no longer suits
Bath re-enamelling in Holdworth, done in place
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. We regularly repair Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people contact us are brown or grey marks that don’t clean off and a peeling or bubbling previous coating.
Every repair is covered by a one-year guarantee.
- Location
- Holdworth (S6)
- County
- Sheffield
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Holdworth. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- No need to remove anything
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- Colour mixed on the day to match
Read our full price list or guide to resurfacing and replacement costs.
About Holdworth
Holdworth is about 5 miles north-west of Sheffield, in Sheffield. Jobs in Holdworth are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Holdworth is one of 118 towns and villages in Sheffield we cover. You can also see our page for Manchester, about 27 miles away.
All of S6 is covered. We regularly work on streets such as Holdworth Lane and West Lane. Nearby, we also work in Low Holdworth (1 mile south), Stacey Bank (1 mile south), Dungworth (1 mile south-west), Worrall (1 mile east) and Coldwell (1 mile north-east). Within a short drive, we also cover Sheffield (5 miles south-east), Netherthorpe (4 miles south-east), Upperthorpe (4 miles south-east), West End (4 miles south-east), Walkley (3 miles south-east) and Broomhall (4 miles south-east).
Near you in Holdworth
Locally, our jobs take us to homes close to Bradfield Dungworth Primary School, Monastery of The Holy Spirit and Glen Howe Park, among other places. Nearby you will also find Sheffield Castle (4.8 miles south-east) and Yorkshire Natural History Museum (2.8 miles south-east). For a walk, there’s Carr House Meadows.
Common problems we fix in Holdworth
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
These are the problems we are asked about most:
- Stains that won’t shift
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
Questions to ask before booking
- How changes to the job are handled
- What aftercare is recommended
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
Nearby places to Holdworth
Also in Holdworth
Landlords, agents and businesses in Holdworth
For anyone letting property in or around Holdworth, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Store bottles off the bath
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
How we price bath re-enamelling
Prices start from £350. We price every job individually. The main factors are:
- Previous DIY repairs that have to come out
- What the surface is made of
- What kind of damage it is
- How much damage there is
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- The postcode, so we can plan the visit
- Any details about the material
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Your questions about bath re-enamelling in Holdworth
How do I get a price for bath re-enamelling in Holdworth?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
What information do you need?
Use the quote form or ring 0345 017 0787.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It typically takes a full day, and you are welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
