Worcestershire · England
Bath Re-enamelling for Hollywood homes
Bath re-enamelling across Hollywood and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- Staining under the taps and around the waste
Bath re-enamelling in Hollywood, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and people most often call us about worn patches where water runs and sits and brown or grey marks that don’t clean off.
Every repair is covered by a one-year guarantee, wherever you are in Worcestershire.
- Where
- Hollywood (B47, B90)
- Region
- Worcestershire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
A repair isn’t right for every job, including:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
FAQs for Hollywood
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Is repairing better than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Signs you need bath re-enamelling in Hollywood
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Stains that won’t shift
- A roll-top that’s seen better days
- Several chips and rust patches
- A coloured bath you want in white
What your quote should include
- The length of the guarantee and what it covers
- If travel is included in the price
- How your room will be protected
- What aftercare is recommended
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Hollywood. The price reflects:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- How much damage there is
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- The material, if you know it
- A wider photo showing the entire bath
- Details of any past repairs
- A coin or ruler next to the damage for scale
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Covering Hollywood
Hollywood is about 4 miles west of Solihull, in Worcestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Hollywood is one of 376 places in Worcestershire we cover. Our nearest city page is Birmingham, about 6 miles away.
Every address in B47 and B90 is within our area. Streets in the area include Shawhurst Lane, Beaudesert Close and Warmington Road, and we cover them all. Nearby, we also work in Bateman's Green (1 mile west), Wythall (1 mile south), Tidbury Green (1 mile south-east), Whitlock's End (1 mile east) and Major's Green (1 mile north-east). Within a short drive, we also cover Redditch (7 miles south), Bromsgrove (9 miles south-west), Droitwich Spa (15 miles south-west), Matchborough (7 miles south), Chawson (15 miles south-west) and Stoke Heath (10 miles south-west).
Landmarks near Hollywood
We visit homes around St Mary's, Walkers Heath Park and Coppice Primary School. For rail, the closest station is Wythall station, about 0.9 miles south-east. Other landmarks nearby include Beoley (4.7 miles south) and The Patrick Motor Museum (2.4 miles north-west). Green spaces nearby include Edgbaston Pool.
- Local facilities include Brandwood (1.8 miles north-west)
Nearby places to Hollywood
More services for Hollywood
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Keeping it looking good
So the finish stays in good condition for years:
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
- Avoid suction-cup mats
- Don’t leave a chip unrepaired
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Open a window if you can
- Tell us about parking, stairs or access
Ask for a price
To get a price, send a couple of photos using our quote form or ring us. We will say straight away if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
