Worcestershire · England
Bath re-enamelling & resurfacing in Tanner's Green, Worcestershire
Full bath re-enamelling and resurfacing at your home in Tanner's Green, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Tanner's Green
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a dull, rough surface that won’t come clean and a coloured bath you want in white, we can help, on pressed steel baths, acrylic baths and basins & shower trays alike.
You get a one-year guarantee, the same in Tanner's Green as everywhere else we work.
- Location
- Tanner's Green (B47)
- County
- Worcestershire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Tanner's Green
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes the best part of a day in most cases. We leave the room clean.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Open a window if you can
- Clear the area around the damage
- Let us know which floor the room is on
Ask for a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say right away if a repair is the right fix.
Related advice
Tanner's Green: your questions answered
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Also near Tanner's Green
What else we do in Tanner's Green
Signs you need bath re-enamelling in Tanner's Green
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
You may need us if you’ve spotted:
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
Before you book anyone
- Whether the price covers travel
- When it can be used again
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the pictures show
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Tanner's Green and nearby
Tanner's Green is about 4 miles south-west of Solihull, in Worcestershire. Our technicians come to customers in Tanner's Green, so there is no workshop to go to. Our repair technicians cover 376 places across Worcestershire. Our jobs stretch from Tanner's Green to Birmingham (7 miles away).
Our repair technicians cover all of the B47 postcode area. Jobs here include addresses on Tanners Green Lane, Mill Lane and Barkers Lane. We also cover the places around Tanner's Green: Inkford (1 mile south-west), Wythall (1 mile north), Rumbush (1 mile east), Tidbury Green (1 mile north-east) and Hollywood (1 mile north). Within a short drive, we also cover Redditch (5 miles south-west), Bromsgrove (8 miles west), Droitwich Spa (14 miles south-west), Matchborough (5 miles south), Chawson (15 miles south-west) and Stoke Heath (9 miles south-west).
What’s near Tanner's Green
Locally, our jobs take us to homes close to Woodrush High School, St Mary's Church and Wythall, among other places. For rail, the closest station is Earlswood (West Midlands) station, about 0.6 miles east. Well-known places in the area include Beoley (3.5 miles south) and West Heath Hospital (3.9 miles north-west).
What we cannot put right
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Tanner's Green
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- Where the damage is and how we get to it
- The type of damage
- How much damage there is
- How hard the colour is to match
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- Any details about the material
Send us a photo of the damage and one of the entire item, and tell us you’re in Tanner's Green, and we will reply with a fixed price.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
