Leeds · England
Bath Re-enamelling in Holt Park
We travel to Holt Park for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
Bath re-enamelling in Holt Park without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We’re frequently asked to fix an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, on basins & shower trays, pressed steel baths and Victorian roll-tops.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Holt Park (LS16)
- County
- Leeds
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
A repair isn’t right for every job, for example:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Covering Holt Park
Holt Park is about 2 miles north-east of Horsforth, in Leeds. We travel to customers in Holt Park, so there is no workshop to go to. We work in 198 places across Leeds, from the larger towns to small villages.
We cover every part of LS16 and the streets around it. Streets in the area include Ash Road, Holt Lane and Holt Road, and we cover them all. Nearby, we also work in Lawnswood (1 mile south), Cookridge (1 mile west), Ireland Wood (1 mile south), Tinshill (1 mile south-west) and Moor Grange (2 miles south). Larger places within reach include Leeds (4 miles south-east), Morley (8 miles south), Pudsey (5 miles south-west), Rothwell (9 miles south-east), Beeston (6 miles south) and Farsley (4 miles south-west).
Near you in Holt Park
In Holt Park, that means homes near Ireland Wood Primary School, Moor Grange County Secondary School and Ralph Thoresby School. Also close by are Golden Acre Park (0.9 miles north-east), St Paul (0.6 miles south) and High Farm Public House (under half a mile south-west). The closest station to Holt Park is Horsforth station, about 1.4 miles south-west of the centre. A little further out are Harewood Castle (4.9 miles north-east) and Horsforth Village Museum (2.3 miles south-west). Open spaces near Holt Park include Yeadon Tarn and Rawdon Billing.
Questions from Holt Park
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
How do I get a price for bath re-enamelling in Holt Park?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Leeds.
The process
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. You can expect it to take the best part of a day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- How many areas need work
- What the surface is made of
- Whether we combine several jobs
- The colour and finish to match
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- A wider photo showing the entire bath
- The material, if you know it
- Daylight if possible, and no flash reflection
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Repair or replace in Holt Park?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- Everything repaired in place
- Normally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
Take a look at our full price list or guide to resurfacing and replacement costs.
Common problems we fix in Holt Park
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Comparing quotes
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- How long it needs to cure
Also near Holt Park
Other services in Holt Park
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
