Gateshead · England

Bath re-enamelling & resurfacing in Hooker Gate, Gateshead

Our repair technicians come to Hooker Gate for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Hooker Gate

About our bath re-enamelling in Hooker Gate

We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. If you’re dealing with a dull, rough surface that won’t come clean and a coloured bath you want in white, we can help, on Victorian roll-tops, basins & shower trays and pressed steel baths alike.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.

Location
Hooker Gate (NE39)
County
Gateshead
Guarantee
A year, on every repair
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Why repair rather than replace?

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why Hooker Gate customers choose us

  • Colour mixed on the day to match
  • One price list for the whole UK
  • We leave the room as we found it
  • Fixed prices from your pictures

Read our prices page or resurfacing vs replacement cost guide.

Where we work around Hooker Gate

Hooker Gate is about 3 miles south-west of Blaydon, in Gateshead. We visit homes and businesses in Hooker Gate and nearby villages, so you do not need to take anything anywhere. We work in 49 places in Gateshead, from the larger towns to small villages. Our jobs stretch from Hooker Gate to Newcastle upon Tyne (about 7 miles away).

Every address in NE39 is within our area, from the main roads to the quietest streets. You’ll find streets such as Woodlands Close, Hookergate Lane and Beechwood, all of which we cover. We also cover the places around Hooker Gate: High Spen (1 mile north), Victoria Garesfield (1 mile south-east), Highfield (1 mile south-east), Lintzford (1 mile south-east) and Rowlands Gill (1 mile east). Within a short drive, we also cover Gateshead (8 miles east), Blaydon (3 miles north-east), Dunston (6 miles east), Whickham (4 miles east), Ryton (3 miles north) and Winlaton (3 miles north-east).

Near you in Hooker Gate

Typical jobs here are in homes near High Spen Primary School, St Patricks Church High Spen and Hookergate School, among other places. For rail, the closest station is Wylam station, roughly 3.6 miles north of the centre. Other landmarks nearby include Shotley Bridge Hospital (4.7 miles south-west) and Prudhoe Castle (4.1 miles north-west). The countryside around Hooker Gate includes Currock Hill and Addison and Hedgefield Woods.

Map of Hooker Gate © OpenStreetMap contributors

When we would advise against a repair

We will always be straight with you, so here’s what a repair can’t fix:

  • Anything hidden under an old coating, until we remove it
  • Plumbing leaks, which need a plumber
  • Acrylic that moves when you stand in it

Send us photos and we will tell you honestly.

Materials we work on in Hooker Gate

  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays

Aftercare tips

Once the work has cured, treat it gently:

  • Do not leave a chip unrepaired
  • Clean with a soft cloth and mild detergent
  • Don’t leave bottles, razors or sponges standing on the surface
  • Dry the bath after use to stop limescale

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

What happens on the day

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, and we finish with a tidy-up and a look at the finished work together.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area

How to get a price

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Related advice

How we price bath re-enamelling

Resurfacing from £350. There’s no charge for travel to Hooker Gate. The price depends on:

  • Unusual colours or finishes
  • The material and finish
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Send pictures for a quote

You can take the pictures on your phone. Ensure they show:

  • A coin or ruler next to the damage for scale
  • Any details about the material
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.

Do you need bath re-enamelling in Hooker Gate?

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

Send us a picture if you notice any of these:

  • An outdated colour you’d like to change
  • Brown or grey marks that do not clean off
  • A period or roll-top bath worth keeping
  • Chips and rust in more than one place

What to look for in a quote

  • If travel is included in the price
  • Whether the price is fixed and includes VAT
  • How long it needs to cure
  • What happens if the damage is worse than the pictures show

Our hiring checklist

Landlords, agents and businesses in Hooker Gate

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

We’re used to working with agents and managing companies. Send the address, pictures and access details.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Questions from Hooker Gate

Someone resurfaced my bath and it’s peeling. Can you help?

Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Can you make a coloured bath white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

How long does re-enamelling take?

Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is there a smell?

There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.

Is a repair better than a new one?

Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

What happens after I send pictures?

You will get a fixed quote back, generally with dates to choose from. There’s no obligation to book.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.