Gateshead · England
Bath Re-enamelling for Rowlands Gill homes
Full bath re-enamelling and resurfacing in Rowlands Gill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that’s failing
How we handle bath re-enamelling in Rowlands Gill
Most baths are re-enamelled in a day, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a peeling or bubbling previous coating and worn patches where water runs and sits, we can typically put it right, whatever the material.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Rowlands Gill (NE39)
- County
- Gateshead
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Also near Rowlands Gill
What else we do in Rowlands Gill
Keeping it looking good
Looking after the surface is easy:
- Rinse off hair dye, oils and bath bombs straight away
- Do not leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Do you need bath re-enamelling in Rowlands Gill?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
These are the problems we’re asked about most:
- Worn patches where water runs and sits
- Stains that will not shift
- Enamel that’s lost its shine and feels rough
- An old resurfacing that is failing
Before you book anyone
- Whether a trained technician does the job
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Our work in Rowlands Gill
Rowlands Gill is about 3 miles south of Blaydon, in Gateshead. Whether you are in the middle of Rowlands Gill or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 49 towns and villages in Gateshead. Our nearest city page is Newcastle upon Tyne, about 6 miles away.
Our technicians cover all of NE39. We regularly work on streets such as Station Road, Derwent Avenue and Norman Road. If you’re just outside Rowlands Gill, we cover Highfield (1 mile west), Victoria Garesfield (1 mile west), Burnopfield (1 mile south-east), Lintzford (1 mile south-west) and High Friarside (1 mile south). Within a short drive, we also cover Gateshead (6 miles east), Blaydon (3 miles north), Dunston (5 miles north-east), Whickham (3 miles north-east), Ryton (4 miles north) and Winlaton (3 miles north). As one of the bigger places in Gateshead, Rowlands Gill is somewhere we visit often.
Local landmarks in Rowlands Gill
We visit homes around Hookergate School, Rowlands Gill Community Primary School and St Barnabas Church. Rowlands Gill’s nearest station is Blaydon station, about 3.5 miles north-east of the centre. Nearby you’ll also find Blaydon Urban District (3 miles north) and Dunston Hill Hospital (4 miles north-east). Green spaces nearby include Addison and Hedgefield Woods and Currock Hill.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Rowlands Gill as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
What affects the price in Rowlands Gill
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether old repairs or coatings need taking off
- How much damage there is
- Doing more than one item at once
- The material and finish
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Natural light rather than flash
- A close-up of the damage, in focus
- Where you are, by postcode
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Common questions in Rowlands Gill
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What happens once I’ve sent pictures?
We come back with a fixed quote. There’s no obligation to book.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
About our accreditations · Every repair comes with a one-year guarantee.
