County Durham · England
Bath re-enamelling & resurfacing in Horden, County Durham
Bath re-enamelling across Horden and nearby, normally in one visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
Bath re-enamelling at your home in Horden
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Typical jobs include a coloured bath you want in white and brown or grey marks that don’t clean off, on pressed steel baths, Victorian roll-tops and cast iron baths.
Every repair is covered by a one-year guarantee.
- Where
- Horden (SR8)
- Region
- County Durham
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Horden
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
How to care for the repair
Once the work has cured, treat it gently:
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs straight away
- Do not use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Places near Horden
More services for Horden
Do you need bath re-enamelling in Horden?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Look out for any of the following:
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
- A coating lifting around the plughole
- Chips and rust in more than one place
Before you book anyone
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
- How your room will be protected
- Who will actually do the work
What affects the price in Horden
Resurfacing from £350. We charge the same across the UK, including Horden. The price reflects:
- How many areas need work
- What the surface is made of
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
You can take the pictures on your phone. Just make sure we can see:
- Whether it’s been repaired or coated before
- A picture taken from further back
- The material, if you know it
- Where you are, by postcode
Email us photos of the damage and one of the entire item, and tell us you’re in Horden, and we’ll come back with a fixed quote.
Covering Horden
Horden is about 1 mile east of Peterlee, in County Durham. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 329 towns and villages in County Durham, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 20 miles away.
Here we cover the SR8 postcode area. From South Terrace, Tees Street and Eleventh Street or a nearby road, a technician can come to you. If you are just outside Horden, we cover Peterlee (1 mile west), Little Thorpe (1 mile north-west), Easington Colliery (2 miles north), Easington (2 miles north-west) and Old Shotton (2 miles south-west). We also work in nearby towns such as Durham (10 miles west), Newton Aycliffe (14 miles south-west), Spennymoor (12 miles west), Seaham (5 miles north), Chester-le-Street (12 miles north-west) and Birtley (14 miles north-west).
Landmarks near Horden
Around Horden, we work in homes near Cotsford Junior School, Dene Community School and Church of St Mary the Virgin and the streets around them. There’s a railway station in Horden itself: Horden station. A little further out are Peterlee Community Hospital (0.9 miles south-west) and Castle Eden (1.8 miles south-west). The countryside around Horden includes Beacon Hill.
- Parks and local facilities nearby include Easington (2.3 miles north-west)
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Horden
- We will tell you if it’s not worth repairing
- A year’s guarantee on all work
- No extra charge for your area
- Everything repaired in place
See our full price list and bath cost comparison.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
The process
We agree an arrival time beforehand. Once we are there, the work takes the best part of a day for most jobs. We leave the room clean and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Clear the area around the damage
- Make sure the area is dry
- Let us know which floor the room is on
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
When we would advise against a repair
We won’t take on work that will not last, so these are the limits:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
