Derbyshire · England
Bath Re-enamelling for Horse Dale homes
Local bath re-enamelling for Horse Dale: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
Where we work around Horse Dale
Horse Dale is about 3 miles south-west of Matlock, in Derbyshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 532 places across Derbyshire, from the larger towns to small villages. Our nearest city page is Manchester, about 35 miles away.
Postcode districts we cover here: DE4. You’ll find streets such as Bell Lane, Slaley Lane and Uppertown Lane, and we cover them all. Close by, we cover Winster (2 miles north-west), Upper Town (3 miles north-west), Warrencarr (3 miles north), Birchover (3 miles north-west) and Stanton Lees (3 miles north). Further out, we also cover Chesterfield (11 miles north-east), Belper (8 miles south-east), Heanor (13 miles south-east), Dronfield (14 miles north-east), Ripley (10 miles south-east) and Bolsover (15 miles north-east).
Around Horse Dale
Around Horse Dale, we work in homes near St James the Apostle's Church, Heights of Abraham and Barley Mow pub and the streets around them. For rail, the closest station is Matlock Bath station, roughly 1.8 miles east. Further afield, we also cover the area around Willersley Castle (1.9 miles east) and Whitworth Hospital (2.4 miles north-east). For a walk, there is Harboro' Rocks.
Bath re-enamelling at your home in Horse Dale
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair acrylic baths, basins & shower trays and cast iron baths, and people most often call us about a bath that stays dull however much you clean it and staining under the taps and around the waste.
We stand behind the work with a one-year guarantee.
- Area
- Horse Dale (DE4)
- Region
- Derbyshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Let us know which floor the room is on
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Landlords, agents and businesses in Horse Dale
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Do you need bath re-enamelling in Horse Dale?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Clients normally contact us about:
- A bath in a colour that no longer suits
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
- Stains that will not shift
What to look for in a quote
- What protection goes down before work starts
- What the guarantee covers, and for how long
- Whether the price covers travel
- Whether they match the colour on site
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- How many areas need work
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Where you are, by postcode
- Natural light rather than flash
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Towns and villages near Horse Dale
Other services in Horse Dale
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Holes rusted through the metal
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Store bottles off the bath
- Have chips seen to early
- Keep suction mats out of the bath
- Respect the curing time we give you
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
FAQs for Horse Dale
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you come to Horse Dale?
We do. Repair technicians travel to Horse Dale from across the region, and the price is the same as everywhere else.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Horse Dale
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- Everything repaired in place
See our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
