Norfolk · England
Bath Re-enamelling in Horsham St Faith
Fixed-price bath re-enamelling in Horsham St Faith and the surrounding area, usually in one visit.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
When to call us in Horsham St Faith
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The most common problems we’re called about are:
- A coating lifting around the plughole
- A coloured bath you want in white
- Wear marks under the taps
- Stains that will not shift
Before you book anyone
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- How your room will be protected
- Aftercare advice
Bath re-enamelling at your home in Horsham St Faith
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. We work on acrylic baths, basins & shower trays and cast iron baths, and common reasons people get in touch are chips and rust in more than one place and a bath in a colour that no longer suits.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Horsham St Faith (NR10)
- Region
- Norfolk
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Horsham St Faith
Horsham St Faith is about 4 miles north of Norwich, in Norfolk. We travel to customers in Horsham St Faith, so there’s no workshop to go to. We work in 797 places in Norfolk.
Postcode districts we cover here: NR10. Whether you live on Cross Keys Close, Norwich Road and Weavers Close or anywhere nearby, a technician can come to you. Neighbouring places we cover include Drayton (2 miles west), Thorpe Marriott (3 miles west), Hellesdon (3 miles south-west), Taverham (3 miles west) and Costessey (3 miles south-west). We also work in nearby towns such as Dereham (14 miles west), Wymondham (10 miles south-west), Sprowston (3 miles south-east), Thorpe St Andrew (5 miles south-east), North Walsham (10 miles north-east) and Norwich Lanes (4 miles south).
Near you in Horsham St Faith
Locally, our jobs take us to homes close to The Black Swan pub, St Faiths CofE Primary School and Church of the Blessed Virgin and St Andrew, among other places. The nearest railway station is Norwich station, about 4.5 miles south of the centre. Well-known places in the area include Horsford Castle (0.9 miles west) and Anglia Square (3.7 miles south). Open spaces near Horsham St Faith include Wensum Local Nature Reserve.
Other services in Horsham St Faith
Should you replace it?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- One visit for most repairs
- Nothing taken out or refitted
Take a look at our full price list and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Horsham St Faith. The price depends on:
- Where the damage is and how we get to it
- How many items we do on one visit
- The colour and finish to match
- What kind of damage it is
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what helps:
- A photo taken from further back
- Details of any past repairs
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Looking after it afterwards
So the finish stays in good condition:
- Respect the curing time we give you
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to most of the day, including clearing up.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the day after.
Preparing for the visit
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
What a repair can’t fix
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Horsham St Faith
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Questions from Horsham St Faith
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and we will quote them together.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Can I get a quote without a visit?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
About our accreditations · Every repair comes with a one-year guarantee.
