Wiltshire · England
Bath Re-enamelling for Hullavington homes
Bath re-enamelling across Hullavington and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Hullavington, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s an outdated colour you’d like to change and a period or roll-top bath worth keeping, we can help.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Hullavington (SN14)
- Region
- Wiltshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Hullavington
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is usually perfectly sound.
Typical reasons for a call-out include:
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- A bath in a colour that no longer suits
Comparing quotes
- What aftercare is recommended
- If travel is included in the price
- How soon you can use it again
- Is the price fixed, and does it include VAT?
Also near Hullavington
Other services in Hullavington
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Repair or replace in Hullavington?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Why book with us
- No extra charge for your area
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page or resurfacing vs replacement cost guide.
How to care for the repair
Looking after the surface is easy:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
- Do not use the bath until it has fully cured
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Landlord and trade work in Hullavington
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
What affects the price in Hullavington
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- The colour and finish to match
- The material
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- Your postcode, so we can check dates
- One picture of the entire bath
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
To get a price, send a couple of photos using our quote form or ring us. We’ll say right away if a repair is the right fix.
Hullavington and the surrounding area
Hullavington is about 6 miles north of Chippenham, in Wiltshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Hullavington is one of 425 places in Wiltshire where we work. We work right across the region, from Hullavington to Birmingham (about 65 miles away).
All of SN14 is within our area, from the main roads to the quietest streets. From The Street, Belfry Drive and Frog Lane or anywhere nearby, we can come to you. Close by, we cover Stanton St Quintin (1 mile south-east), Lower Stanton St Quintin (2 miles south-east), Norton (2 miles north), Corston (2 miles north-east) and Bremilham (2 miles north). Within a short drive, we also cover Trowbridge (15 miles south), Chippenham (6 miles south), Calne (9 miles south-east), Devizes (15 miles south-east), Melksham (11 miles south) and Corsham (8 miles south).
Landmarks near Hullavington
Locally, our jobs take us to homes close to Church of St Mary and Hullavington CofE Primary and Nursery School, among other places. Well-known places in the area include Chippenham Community Hospital (6 miles south) and Malmesbury Castle (4 miles north-east).
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take the best part of a day, including clearing up.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Open a window if you can
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Advice
FAQs for Hullavington
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
