Dorset · England
Bath Re-enamelling in Hurn
Full bath re-enamelling and resurfacing at your home in Hurn, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that will not shift
About our bath re-enamelling in Hurn
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for enamel that’s lost its shine and feels rough and worn patches where water runs and sits, in basins & shower trays, pressed steel baths and acrylic baths.
All our work comes with a one-year guarantee, wherever you are in Dorset.
- Area
- Hurn (BH23)
- County
- Dorset
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the day after.
Getting ready for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
How to get a price
Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Hurn, and we’ll come back with a fixed quote.
Related advice
What affects the price in Hurn
Prices start from £350. We price every job individually. The main factors are:
- How hard the colour is to match
- The material and finish
- Whether old repairs or coatings need taking off
- How many items we do on one visit
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send pictures for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Repairing versus replacing in Hurn
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- Repair technicians who travel to you, UK-wide
- Colour mixed on the day to match
Read our prices page or resurfacing vs replacement cost guide.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Dorset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Don’t leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Also in Hurn
When we would advise against a repair
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Hurn
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
What we are called out for in Hurn
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- Chips and rust in more than one place
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
What to look for in a quote
- Whether they match the colour on site
- Whether the price covers travel
- How changes to the job are handled
- What aftercare is recommended
Common questions in Hurn
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Where we work around Hurn
Hurn is about 3 miles north-east of Bournemouth, in Dorset. Jobs in Hurn are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Hurn is one of 462 places in Dorset where we work.
We cover every part of BH23 and the streets around it. Whether you live on Moors Close and Avon Causeway or anywhere nearby, we can come to you. Nearby, we also work in West Hurn (1 mile south-west), Avon Common (1 mile north), Merritown (1 mile west), Holdenhurst (1 mile south) and Blackwater (1 mile south-east). Larger places within reach include Christchurch (4 miles south-east), Wimborne Minster (7 miles west), Verwood (7 miles north), Ferndown (4 miles north-west), Broadstone (8 miles west) and Corfe Mullen (9 miles west).
Around Hurn
In Hurn, that means homes near Bournemouth School for Girls, among other places. Hurn’s nearest station is Christchurch station, roughly 3 miles south-east. Nearby you’ll also find Christchurch Castle (3.5 miles south-east) and Castlepoint Shopping Centre (1.8 miles south-west). Not far away are St Catherine's Hill.
About our accreditations · Every repair comes with a one-year guarantee.
